Is the Dexstar Conventional Steel Wheel AM20766 Lug or Hub Piloted

Question

Question:

Do these rims for on hub so the weight is not just on wheel studs

asked by: Paul

0

Expert Reply:

The Dexstar Conventional Steel Wheel part # AM20766 is lug piloted which means the wheel is centered and supported via the lug nuts/studs. If you are looking for a wheel that is centered and support via the pilot hole then that would be referred to as hub piloted. The trailer hub will dictate whether you need lug or hub piloted wheels but they are not cross-compatible. That said, lug piloted is the most common and likely what you have now.

expert reply by: Conner L

0

Answer 1

For the Dexstar Conventional wheels #AM20766 you referenced, I recommend using the Karrier ST235/85R16 Radial Trailer Tire - Load Range E #AM10295. This is a really nice quality radial tire that will give you a high load range and great traction…

view full answer...

Answer 2

The Dexstar Conventional Steel Wheel part #AM20766 is designed for use on trailers. That said, it could be used on a vehicle so long as the 8 on 6-1/2" bolt pattern, 16" diameter x 6" wide dimensions, and positive…

view full answer...

Answer 3

We have many different kinds of 1/2" lug nuts; part #CE11051 for the open style, part #LHLR103 for acorn short, or part #AM90049 for acorn long. The open style are for steel wheels and the acorn style are for aluminum wheels. The longer ones…

view full answer...

Answer 4

I believe the wheel that they are refering to is the Dexstar Conventional Steel Wheel #AM20766. This has the same 8 on 6-1/2" lug pattern that the 1953 Chevrolet Advance Design Trucks had. This wheel is only 16" in diameter where…

view full answer...

Answer 5

The Dexstar Conventional Steel Wheel #AM20514 is a lug centric wheel. All of their conventional style wheels are lug centric. They require the use of a 60-degree cone lug such as the Americana Trailer Wheel Lug Nut #AM90049

view full answer...

Answer 6

For the Dexstar Conventional Steel Wheel part #AM20766 that you are interested in we do not carry any babymoon covers that would fit but we do have more traditional hub covers like the part #PXQT865CHN.

view full answer...

Answer 7

The Dexstar Conventional Steel Wheel #AM20766 only comes in black but I may have another option for you. The Dexstar Steel Mini Mod Trailer Wheel #AM20759 is another 16 inch by 6 inch rim with an 8 on 6-1/2 bolt pattern and +.5 offset that has a…

view full answer...

Answer 8

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 9

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 10

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 11

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 12

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Is the Dexstar Conventional Steel Wheel AM20766 Lug or Hub Piloted

Product Page this Question was Asked From

Continue Researching