Trailer Hitch For A 2019 Chevrolet Express Van Cutaway Cab And Chassis Model

Question

Question:

Iam looking for a trailer hitch mount for my truck its a 2019 Chevrolet I think its a cutaway model not sure.

asked by: Mauricio O

0

Expert Reply:

Yes, the pictured vehicle is a Cutaway Cab and Chassis model so the Buyers Products 2" Hitch Receiver For GM Express/Savana with Cutaway Chassis # 3371801102 hitch will work great for your application. This hitch has a maximum gross trailer weight of 12,000 lbs and features a corrosion resistant gloss finish. Also included below are the installation details for this hitch.

expert reply by: Patrick R

0

Answer 1

The only type of trailer hitch that may work on a school bus like your 2001 GMC Thomas School Bus is an adjustable hitch like the Curt #13703. This is a universal type hitch that will fit box, C-channel, or I-beam frames that are 22 inches to 72…

view full answer...

Answer 2

The Buyer's Products Class IV hitch you had looked at, part #3371801102 would be the correct fit for your 2005 GMC Savana Van Cutaway Chassis, but in order to make sure it'll be compatible with your Royal utility body, you'll need to make…

view full answer...

Answer 3

The Buyers Products 2" Hitch Receiver For GM Express/Savana with Cutaway Chassis #3371801102 measures 39 inches wide center to center. Then from edge of receiver tube to rear most hole 20-3/4 inches long. I've attached a photo with…

view full answer...

Answer 4

On the Buyers Products hitch, part #3371801102, the mounting holes are 38-3/8 inches across center on center. Then on each side starting with the hole that's towards the rear of the vehicle they measure 3-11/16 inches from the first to the center…

view full answer...

Answer 5

The only trailer hitch available or a 2020 Chevrolet Express Van Shuttle Bus is the Buyers Products 2" Hitch Receiver part #3371801102. The Buyers Products 2" Hitch Receiver does require drilling but there is no other option for this. The…

view full answer...

Answer 6

I recommend looking at the Buyers Products 2" Multi-Fit Hitch Receiver For Ford/GM with Cutaway Service Bodies #3371801401 for your 2007 E-350 Chassis. This receiver is designed to fit frames that are 42" wide to the outside of the frame…

view full answer...

Answer 7

There is a trailer hitch for your 2019 Chevy Express Cutaway van; I recommend the Buyers Products 2" Hitch Receiver #3371801102 because of its strong 12,000 lb towing capacity and 1,200 lb tongue weight capacity. This hitch is constructed out of…

view full answer...

Answer 8

Ths shorter school buses are built on van cutaway chassis. So since your bus is built on a 2002 GMC Savana Cutaway chassis the Buyers Products hitch part #3371801102 that you referenced would fit and work well.

view full answer...

Answer 9

From where the mounting brackets on the Buyers Products 2" Hitch Receiver #3371801102 will meet up to the frame of your GMC van down to the top of the receiver opening measures 7" (see attached).

view full answer...

Answer 10

It's not designed to. The Curt Trailer Hitch item #C15312 is custom fit for 2001 - 2010 Sierra and Silverado 2500 and 3500s. The width of the bolt holes is the same as the item #3371801102 as you can see from the dimensional diagrams below.…

view full answer...

Answer 11

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 12

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Trailer Hitch For A 2019 Chevrolet Express Van Cutaway Cab And Chassis Model

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching