How To Setup a 2019 Jeep Cherokee Trailhawk for Flat-Towing
Question:
after I set up the jeep for towing, should the ignition be in the off, accfoot or start position??? Want to make sure the front wheels turn/track with the motorhome.
asked by: Wayne I
Expert Reply:
I have attached for you below the recommended procedure to flat-tow a 2019 Jeep Cherokee Trailhawk per the owner's manual. The last step states to place the ignition in the off position so that is what I must recommend.
1. Bring the vehicle to a complete stop on level ground, and shift the transmission to park.
2. Turn the engine off.
3. Turn the ignition to the on/run mode, but do not start the engine.
4. Press and hold the brake pedal.
5. Shift the transmission into neutral.
6. Using a ballpoint pen or similar object, push and hold the recessed neutral (N) button (located by the selector switch) for four seconds. The light behind the N symbol will blink, indicating shift in progress. The light will stop blinking (stay on solid) when the shift to neutral (N) is complete.
7. After the shift is completed and the neutral (N) light stays on, release the neutral (N) button.
8. Start the engine.
9. Release the parking brake.
10. Shift the transmission into reverse.
11. Release the brake pedal for five seconds and ensure that there is no vehicle movement.
12. Shift the transmission to neutral.
13. Apply the parking brake
14. Shift the transmission into park, turn the engine off, and remove the key fob.
15. Attach the vehicle to the tow vehicle using a suitable tow bar.
16. Turn the ignition to the on/run mode, but do not start the engine.
17. Press and hold the brake pedal.
18. Release the parking brake.
19. Turn the ignition off, remove the key fob, and release the brake pedal.
If you do not already have the parts needed to flat-tow the vehicle then you can take a look below at some of my recommendations below.
Roadmaster Direct-Connect Base Plate Kit part # RM-521451-5
Roadmaster Nighthawk All Terrain Tow Bar part # RM-676
Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit part # RM-15267
Blue Ox Patriot Portable Braking System part # BLU37TR
Roadmaster Battery Charge Line Kit for Towed Vehicles part # RM-156-25
Stacey
4/6/2024
Will towing in this way deplete the car battery? Do I have to buy some kind of kit to keep the battery topped off? I keep reading different thoughts on this. Some say if the car is in the AUX position when towing it will drain battery (but the Cherokee should be in the OFF position so it won't drain?). I'm confused and don't want to arrive anywhere with a dead car battery. Thanks for you help. Stacey
Products Referenced in This Question
Blue Ox Patriot Portable Flat Tow Brake System - Proportional
- Tow Bar Braking Systems
- Brake Systems
- Proportional System
- Recurring Set-Up
- Portable System
- Power Assist Brake Compatible
- Air Brakes
- Air Over Hydraulic Brakes
- Hydraulic Brakes
- Blue Ox
more information >
Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit
- Tow Bar Wiring
- Splices into Vehicle Wiring
- Diode Kit
- Universal
- Tail Light Mount
- Roadmaster
more information >
Roadmaster Battery Charge Line Kit for Towed Vehicles
- Accessories and Parts
- Tow Bar Wiring
- Battery Charge Line Kit
- Roadmaster
more information >
Roadmaster Nighthawk All-Terrain Tow Bar w/ LED Lights - Non-Binding - RV Mount - 8,000 lbs
- Tow Bar
- Hitch Mount Style
- Telescoping
- Aluminum
- 8000 lbs
- Fits Roadmaster Base Plates - Direct Connect
- Stores on RV
- Non-Binding
- Roadmaster
more information >
Product Page this Question was Asked From
Roadmaster Direct-Connect Base Plate Kit - Removable Arms
- Base Plates
- Removable Drawbars
- Twist Lock Attachment
- Roadmaster
more information >
Featured Help Information
Instructions
Continue Researching
- Shop: Base Plate for Tow Bar
- Shop: Vehicle Tow Bar Wiring
- Shop: Vehicle Tow Bar Brake System
- Shop: Roadmaster Battery Charge Line Kit for Towed Vehicles
- Shop: Roadmaster Direct-Connect Base Plate Kit - Removable Arms
- Shop: Blue Ox Base Plate Kit - Removable Arms
- Shop: etrailer Invisible Base Plate Kit - Removable Arms
- Shop: Blue Ox Tow Bar Wiring Kit
- Shop: Trailer Wiring
- Shop: Trailer Hitch
- Shop: Blue Ox Patriot Portable Flat Tow Brake System - Proportional
- Article: Flat Towing Package for 2019 Jeep Cherokee
- Shop: Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit
- Shop: Brake Controller
- Q&A: Replacement Tabs/Pins For a Blue Ox Base Plate Kit on a 2023 Jeep Grand Wagoneer
- Video: Roadmaster Direct-Connect Base Plates Review and Installation - 2019 Jeep Cherokee
- Video: Best 2019 Jeep Cherokee Flat Tow Set Up Options RM-521451-5
- Video: Review of Blue Ox Tow Bar Wiring - Bypasses Jeep Vehicle Wiring - BLU79FR
- Video: Best 2019 Jeep Cherokee Flat Tow Set Up Options
- Article: 4 Steps to Choosing Your 5th Wheel Pin Box
- Video: etrailer Invisible Base Plate Kit Installation - 2021 Jeep Cherokee
- Video: Roadmaster Tow Bar to Blue Ox Brackets Adapter Review
- Q&A: Is Mopar Flat Tow Wiring Harness Required For 2019 Jeep Cherokee Trailhawk
- Video: Curt Trailer Hitch Receiver Installation - 2019 Jeep Cherokee
- Q&A: Tow Bar Wiring Kit that Fits 2019 Jeep Grand Cherokee
- Shop: Suspension Enhancement
- Article: Roadmaster Vehicle Specific Base Plates
- Search Results: adapter
- Search Results: blue ox 62 3468
- Search Results: break away switch
Stacey
4/6/2024
Side note: we are using the air force one braking system. Stacey