Can Timbren Axle-Less Trailer Suspension System be Installed on CE Smith Boat and Kayak Trailer
Question:
Would it be possible to install the stub torsion axles on this trailer? If so, which would you recommend? Thanks for your time
asked by: Jimmy
Helpful Expert Reply:
I reached out to my contact at Timbren and confirmed that you can install one of their Axle-Less Trailer Suspension Systems on the CE Smith Multi Sport Plus Boat and Kayak Trailer 800 lbs # CE48870, so long as a cross member is used by either welding or bolting it on. Since Timbren doesn't make an 800 lb Axle-Less System, your best option is the 1,200 lb system # ASR1200S04. I've attached a video where we used a cross member to install # ASR1200S04 as well as a link to the complete installation instructions for you to check out.
The hubs used on the Multi Sport Trailer use different size bearings, so for compatible hubs, I recommend using the Trailer Idler Hub Assembly for 3,500-lb E-Z Lube Axles - 5 on 4-1/2 - Galvanized # AKIHUB-545-35-G-EZ-K. The nice thing about these is their superior galvanized finish which are ideal for boat trailer applications and will help resist rust and corrosion.
Keep in mind that this does not automatically increase the overall capacity of your trailer from 800 lbs to 1,200 lbs. While it's true that most of the time the limiting factor on a trailer is its suspension and axle components, there may be other unknown aspects of the trailer that are not equipped to handle anything higher than the 800 lbs specified by the manufacturer.
Products Referenced in This Question
Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized
- Trailer Hubs and Drums
- Hub
- Easy Grease
- EZ Lube
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Timbren Axle-Less Trailer Suspension - Standard Duty - No Drop - 4 Bolt Flange - 1,200 lbs
- Trailer Axles
- Rubber Spring Suspension
- Easy Lube Spindles
- No Hubs
- 1200 lbs
- Spindles Only
- Universal Fit
- No Drop or Lift
- Timbren
more information >
Product Page this Question was Asked From
CE Smith Multi Sport Plus Boat and Kayak Trailer w/ Bunks - 12" Wheels - 14' Boat - 800 lbs
- Kayak Trailer
- Bunk Boards
- 2 Kayaks
- 14 Feet Long
- 800 lbs
- 4-1/2W x 12L Foot
- Galvanized Steel
- CE Smith
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Where Can Winch Mount and Bow Roller Mount on CE Smith Multi Sport Plus Boat Trailer 48870
- Q&A: Does the CE Smith Multi Sport Plus Boat and Kayak Trailer w/ Bunks CE48870 Come Pre-Greased
- Q&A: Small Trailer Recommendation for Flycraft Inflatable Boat
- Q&A: Should Weight of Boat on Trailer be Balanced on Either Side of Axle
- Q&A: What Does CE Smith Multi Sport Plus Boat Trailer CE48870 Weigh
- Q&A: CE Smith Multi Sport Plus Boat Trailer with Bunks # CE48870 Overall Width
- Article: Trailer Tire Sizing
- Q&A: What is Speed Rating for CE Smith Multi Sport Boat/Kayak Trailer CE48870 and Can it Be Increased
- Article: How to Measure for Trailer Hitch Drop
- Article: How to Choose the Right Trailer Hitch Class
- Article: Determining Trailer Tongue Weight
- Article: Trailer Wiring Diagrams
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)