Front Mount Hitch Compatible with 2018 GMC Yukon SLT or Denali

Question

Question:

Will this fit a Yukon SLT or Denali trim level? Not clear from the specs

asked by: Jeff

0

Expert Reply:

The correct Curt Front Mount Hitch for your 2018 GMC Yukon is part # C31073. It is confirmed to fit all models, including ones with the SLT and Denali trim packages and features the same capacities as the # C31069:

Line pull: 9,000 lbs
Vertical load: 500 lbs
Gross trailer weight: 5,000 lbs

The Curt Front Mount Hitch # C31069, which you were checking out, fits certain styles of 2014 and current Chevy Silverado/GMC Sierra 1500.

expert reply by: Carla M

0

Answer 1

A front hitch itself, either #C31073 or #65064 for the 2015 GMC Yukon XL Denali, would not interfere with the adaptive cruise control on the vehicle. But when you have something in the hitch that item could interfere with the sensors for the cruise…

view full answer...

Answer 2

You are going to have to trim out a section of your front air dam to install the Curt Hitch part #C31073 that is 3 inches wide by 1.50 inches tall. A similar amount of trimming is required for the Draw Tite hitch part #65064 as well. The other option…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

The Hellwig Adjustable Big Wig Rear Anti-Sway Bar #HE94FR is only going to leave a few inches between it and the spare tire, as you can see in the attached picture. Depending on how far forward you have the tire it could potentially interfere with…

view full answer...

Answer 5

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 6

Great question Luke! These are all great options, but let me point out a few differences for you. The etrailer Adjustable 2-Ball Mount #e66PR is a good quality, affordable option compared to similar options like the BulletProof Hitches 2-Ball Mount…

view full answer...

Answer 7

To add an anti-rattle device to the Curt Adjustable 2-Ball Mount #C99NR I highly recommend the Roadmaster Quiet Hitch #RM-061 simply because it's a tried-and-true solution that's easy to use and still very effective. The Quiet Hitch…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 10

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Front Mount Hitch Compatible with 2018 GMC Yukon SLT or Denali

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching