Is the MCL40RB a 2 Diode LED Light?

Question

Question:

Can you confirm if the light shown in the attached pics is the same as MCL40RB. I cant see the inside of your light so dont know if it is the same. I do have a 2 diode light which measures 4 x 1 1/2. Thanks.

asked by: Matt E

1

Helpful Expert Reply:

The LED Clearance of Side Marker Light # MCL40RB is the same light as the one you've got pictured. This light is also a 4" x 1-1/2" light with 2 diodes and will be an acceptable replacement for the light shown in your picture. The mounting holes on the # MCL40RB are 3" apart, center on center.

expert reply by: Erik B

1

click to enlarge

Answer 1

I have included a link to our product video of the similar Amber Clearance Light #MCL40APB below. This has the same design with an amber lens and in the video she demonstrates removing the lens. You can also slide a flat head screw driver between the…

view full answer...

Answer 2

We have what you are looking for. Depending on the style you currently have you have some choices. Just depends on what size and bulb type you need. We have the Optronics LED Trailer Clearance or Side Marker Light w/ Reflector - 6 Diodes - Rectangle…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

If you are just looking for a new converter, the Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers part #PD4635V will be a direct upgrade for the Magnetek Converter Series 6300 Model 6332 that you have now.

view full answer...

Answer 7

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 8

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 9

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Is the MCL40RB a 2 Diode LED Light?

Product Page this Question was Asked From

Continue Researching