Front Hitch for 2019 TRD Off Road Premium 4Runner

Question

Question:

Hello, Do you offer front hitch compatible with a 2019 TRD Off Road Premium 4Runner? If so, can it be installed with the skid plate intact? I watched your Youtube installation video for a 2015 Tacoma where the skid plate was re-installed after the hitch was placed, but one of your Q/As seems to state there is insufficient space for both the front hitch and skid plate to mount together for a 4Runner. Thank you.

asked by: Steve H

0

Expert Reply:

We do have the Curt hitch part # C31076 which is a confirmed fit for your 2019 Toyota 4Runner TRD Premium. We had a customer with a Trail Edition come back and tell us it fit well with the skid plate and they didn't have to remove or modify it.

expert reply by: Jameson C

0

Answer 1

The Curt Front Hitch #C31076 will install on the front driver and passenger side frame rails. I have linked a picture showing the bolt holes on the passenger side frame rail and it will be the same for the driver's side. I checked and the Curt…

view full answer...

Answer 2

You are correct that the one available front mount hitch fit for the 2014 Toyota 4Runner, part #C31054, excludes the Trail Edition. In some cases certain versions of vehicles may have additional structural reinforcements in the frames that block the…

view full answer...

Answer 3

I attached a link to this page (down below the product links), that has the instructions for the Curt Front Hitch part #C31076 that you referenced. This is a confirmed fit for your 2017 Toyota 4Runner TRD so it would be a great fit.

view full answer...

Answer 4

For your 2014 Toyota 4Runner you can use Curt front mount hitch #C31054 that you have referenced. It fits both 2-wheel drive and 4-wheel drive models. It does not fit the Trail Edition. I have included a link to a video showing an example…

view full answer...

Answer 5

Fantastic photos thanks so much, and the short answer is it is very, very likely the skid plate on your 2022 Toyota 4Runner TRD Off Road will interfere with the Curt Front Mount Trailer Hitch Receiver #C31076. This model of 4Runner has a different…

view full answer...

Answer 6

Yes there is! If you have the SR5 or TRD model 2019 Toyota 4Runner then the Curt Front Mount Trailer Hitch #C31076 will work perfectly. If you have the Limited model you can use the Curt #C31054. Both hitches offer a simple bolt-on installation to…

view full answer...

Answer 7

My recommended front hitch receiver for your 2021 Toyota 4Runner Venture is the Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2", part #C31076.

view full answer...

Answer 8

We do have a front mounted hitch that fits for your 2018 Toyota 4Runner TRD, the Curt #C31076.

view full answer...

Answer 9

The front skid plate you have on your 2018 Toyota 4Runner TRD will need to be removed in order to install a front mount trailer hitch like the Curt Front Mount Trailer Hitch Receiver part #C31076. This has to do with where the hitch mounts in…

view full answer...

Answer 10

The Draw-Tite front mount hitch #65031 requires removing the front skid plate for installation. See instructions and video links I have linked for this hitch. On front mount hitch #31180 you should not have to remove the skid plate. The 2001 model we…

view full answer...

Answer 11

Normally the skid plate can reinstall after the front hitch part #31313 is installed but on the TRD models the skid plate is different and can't be.

view full answer...

Answer 12

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Front Hitch for 2019 TRD Off Road Premium 4Runner

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching