Will the Baby Moon Center Cap # AM90086 Fit the Dexstar Conventional Wheel # AM20304

Question

Question:

Are the Americana Baby Moon Trailer Wheel Center Cap, part #AM90086 compatible with the Dexstar Conventional Steel Wheel with Offset, part #AM20304? Thank you.

asked by: David C

0

Expert Reply:

Yes, the Americana Baby Moon Trailer Wheel Cap, # AM90086, will fit on the Dexstar Conventional Steel Wheel with Offset, # AM20304.

This center cap is designed to fit conventional trailer wheels between 13 and 15 inches in diameter with a 5 bolt pattern.

expert reply by: John H

0

Answer 1

Narrower tires and rims will certainly help you pick up some side clearance for fitting your boat trailer into your garage. A wheel with positive offset will also help by shifting the wheel's center closer to the trailer frame. Since you have…

view full answer...

Answer 2

Dexstar Conventional Steel Wheel #AM20304 has a pilot hole diameter of 2.62-inches which is noted in the item's specs. This wheel has 1/2-inch of positive offset, meaning that the center of the tire will be 1/2-inch closer to the trailer than the…

view full answer...

Answer 3

The recommended wheel width range for your tires are 5”, 5-1/2”, 6”, and 6-1/2” rims. For a trailer tire, the narrowest possible rim option is going to be the best because it provides more support for the tire. I recommend our Dexstar, part #AM20304.…

view full answer...

Answer 4

The backspacing of Dexstar Conventional Steel Wheel with Offset #AM20304 is 3-3/4-inches. Maximum load capacity is 1,870 lbs at 50 psi.

view full answer...

Answer 5

The largest positive offset 14 inch trailer rim is the part #AM20304 which has a 1/2 inch positive offset. Most trailer wheels have a zero offset or right at zero since it helps distribute the load of the trailer on the wheel. This wheel also has a 5…

view full answer...

Answer 6

The Dexstar Conventional Steel Wheel, part #AM20304 could be used on a passenger vehicle, as long as the vehicle's hubs use a 5 on 4-1/2 inch bolt pattern and the wheel's 1870 lb capacity isn't exceeded (7480lb for 4 wheels.) The wheel…

view full answer...

Answer 7

The answer to your question will depend on whether your wheels are hub centric or lug centric. Hub centric wheels center on the hub using the portion of the hub bore extending through the pilot opening in the wheel. Lug centric wheels center on the…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 10

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 11

Load range B trailer tires are going to have a lower capacity than C load range tires. Basically that, psi rating, and the ply rating are the only differences. A higher load range tire would last a little longer than lower load ranges of the same…

view full answer...

Answer 12

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6-1/2 inch whereas the 225/75-15 fits widths that are 5 inch to 6 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...