Are There SumoSprings for a 2018 NIssan Frontier

Question

Question:

Do you have Sumo Springs for a 2018 Nissan Frontier? Your web site says the ones listed for Nissan Frontier are not confirmed for a 2018 model. Are there different springs for a 2018?

asked by: Tom

0

Expert Reply:

I do have an option but I just checked with Super Springs, the manufacturer of SumoSprings and they do not offer any kits for a 2018 Nissan Frontier. Instead, I recommend the Timbren Rear Suspension Enhancement System part # TTORTUN4L. The Timbren Rear Suspension Enhancement System is very similar to the SumoSprings Solo Custom Helper Springs in how they install and operate but the Timbrens will actually offer more support. The Timbrens also like the SumoSprings won't affect the unloaded ride quality.

There are not a ton of suspension enhancement options for a Nissan Frontier but if you don't like the Timbren Rear Suspension Enhancement System I recommend going with the Firestone Ride-Rite Air Helper Springs part # F2558. The main difference between the Timbrens and Firestones is that one is adjustable (Firestone) and one is not (Timbren) so you can get the perfect combo of support and ride quality.

expert reply by: Conner L

0

Answer 1

I will first start out by addressing the additional transmission cooler you will want to help keep the transmission fluid temperatures at a safe level, while towing a 5,000 lb. trailer with your 2011 Nissan Frontier. As you mentioned, your Frontier…

view full answer...

Answer 2

Ultimately air bags are best when it comes to adjusting for different loads for your Nissan Frontier since they actually have the ability to be adjusted, but they are more expensive and require maintenance which is why the SumoSprings are so…

view full answer...

Answer 3

The lip is supposed to be there. It appears to be a way to allow the bracket to set more level than what the frame of the truck allows since it is angled and not parallel to the ground.

view full answer...

Answer 4

In regards to suspension enhancements for a 2018 Nissan Frontier, you have a few options but there are none from SuperSprings. The best option for unloaded ride quality would be the Firestone Ride-Rite Air Helper Springs part #F2558. However, if you…

view full answer...

Answer 5

The SuperSprings Custom Suspension Stabilizer #SSA1MTKT are not intended to increase the height of your 2007 Nissan Frontier. The stabilizer is meant to provide more support for your vehicle when carrying heavy loads in the cargo area or towing a…

view full answer...

Answer 6

That's an interesting question, and yes, a dual-path compressor like the Firestone Air Command #F2178 can allow air to transfer from one side to the other in a turn. Its function is to allow you to level the air bags to different pressures for…

view full answer...

Answer 7

Firestone Ride-Rite air bags, #F2558, will fit your 2005 Nissan Frontier NISMO. There are Firestone models that will not fit the NISMO edition because of the placement of some brake lines that would block where the brackets for those kits would go…

view full answer...

Answer 8

It sounds like the hold down clamp (see photo) has loosened which has then allowed the SuperSprings Suspension Stabilizer and Sway Control Kit part #SSA1MTKT to shift forward on your 2015 Nissan Frontier. In order to fix this you will want to loosen…

view full answer...

Answer 9

The suspension travel on your 2018 Nissan Frontier SV will not be great enough to create any issues for the Firestone Ride-Rite Air Helper Springs part #F2558 which are a confirmed fit. You are also correct that the Daystar Cradles are used mainly…

view full answer...

Answer 10

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 11

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 12

What you're going to need is two of the transfer switches in that case. I have attached a diagram from Furrion that shows you how you're going to need to hook the two transfer switches #F30ATS up: -one to the other, then one branching off to…

view full answer...

Are There SumoSprings for a 2018 NIssan Frontier

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching