Actual Weight Of Timbren Axle-Less Trailer Suspension System # TASR7KS01

Question

Question:

what Is the actual weight of this kit? Not weight rating but it’s actual weight. I’m wanting to see if there is also a weight advantage to installing this kit. Thank you

asked by: Sara

1

Helpful Expert Reply:

I contacted Timbren who confirmed the actual weight of the Timbren Axle-Less Trailer Suspension System # TASR7KS01 kit minus the packaging is 158 lbs. Compared with full axle kits, yes that is a significant weight difference.

Included is a video resource with additional informaiton from here.

expert reply by: Patrick R

1

Answer 1

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 2

Thank you for providing the specs for the suspension components that you already have. Correct hanger spacing really depends on the components being used such as springs, hangers and equalizers. Most of the hanger spacing dimensions that we have are…

view full answer...

Answer 3

To find the load capacity for your axle you should look on the trailer VIN plate or sticker that lists the VIN number. The weight rating of the axle should be listed on that same plate or sticker. Also, the axle could have a tag or plate on it that…

view full answer...

Answer 4

For a single axle trailer, you want the shackle strap to be able to move so that you have the spring deflection needed for your suspension. Angled like the photo or even almost vertical is fine you just don't want the shackle strap to bind and…

view full answer...

Answer 5

I have attached for you below some common torque values needed for a trailer suspension system but a lot of these will vary by bolt size and other factors. U-Bolts: Varies by Size - 1/2" bolts: 45 ft/lbs - 70 ft/lbs, 9/16" bolts: 65 ft/lbs…

view full answer...

Answer 6

If the trailer wheels scrubbed (dragged and scrapped the ground instead of rolling) when jack knifed then it could have thrown something out of alignment or damaged something. First, inspect the suspension. Look for any elongated holes where…

view full answer...

Answer 7

Since Grand Design is kind enough to list certain parts for their trailers I can confirm you have a 33" wheelbase on your 2020 Grand Design Transcend 27BHS. This means the MORryde Rubber Equalizers #MR87ZR will fit your trailer. Although I'm…

view full answer...

Answer 8

I reached out to Timbren and they do not recommend using the Timbren Axle-Less Trailer Suspension System #TASR7KS01 for triple axle applications because of weight balancing. Although ideally it would work if the load was perfectly balanced, there are…

view full answer...

Actual Weight Of Timbren Axle-Less Trailer Suspension System # TASR7KS01

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching