What Bearing Kit do I Need for my 2007 EZ Loader Boat Trailer
Question:
I am looking for a bearing kit for my 2007 EZ Loader trailer Model # SK1ZX190 Vin# 1L8FAEMA17A043515.
asked by: Jeff
Helpful Expert Reply:
I was able to reach out to my contact at EZ-Loader and was able to determine the bearings and seals you're going to need. You can use Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased part # AKIHUB-545-35-EZ-K if you need a complete replacement with a 5 on 4.5" lug pattern. This one comes pre greased so you just add it to your spindle straight out of the box. Or you can use Bearing Kit for #84 Spindle part # BK2-100 if you just need the bearings, races, seals and the cotter pin and washer. I've provided a video link of me explaining how to change them out for you.
Happy Fishing!
Products Referenced in This Question
Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Easy Grease
- EZ Lube
- Pre-Greased
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Product Page this Question was Asked From
Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing L44649 and L68149
- Race L68111 and L44610
- 3500 lbs Axle
- etrailer
more information >
Continue Researching
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Article: Most Popular Wheel Bearings
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Pre-Greased
- Shop: CE Smith Trailer Idler Hub Assembly w/ Case for 3.5K Axles - 5 on 4-1/2 - Galvanized - Pre-Greased
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized
- Shop: Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Q&A: Correct Bearing Buddies for 3.5K Trailer Hub and Drum Assembly 10 Diameter 5 on 4-1/2 Pre-Greased
- Q&A: Recommended Bearings and Hubs for 3500 lb Square Axle Trailer Spindle
- Q&A: Can an EZ Lube Hub and Drum be Used with Bearing Buddies on a Non-EZ Lube Trailer Axle
- Q&A: Which Bearing Buddy to Use with Trailer Hub # AKIHUB-545-35-G-EZ-K
- Q&A: Bearing Buddy Compatibility With 1.99 Inner Diameter Hub Assemblies.
- Q&A: 3,500 lb Hub Replacement Recommendation for 2001 EZ Loader Boat Trailer
- Q&A: 2002 Alumaweld Boat Rogue Trailer Hubs Replacement
- Video: etrailer Trailer Hubs and Drums - Hub - AKIHUB-545-35-K Review
- Video: etrailer Trailer Hubs and Drums - Hub - AKIHUB-545-35-EZ-K Review
- Video: etrailer Trailer Brakes - Electric Drum Brakes - AKEBRK-35-SA Review
- Video: etrailer Trailer Hubs and Drums - Hub - AKIHUB-545-35-G-EZ-K Review
- Video: etrailer Trailer Bearings Races Seals Caps - Seals - 58846 Review
- Shop: Trailer Hitch
- Search Results: trailer brakes
- Video: etrailer Electric Trailer Brake Kit Installation
- Shop: Trailer Wiring
- Search Results: bearing buddy
- Article: Trailer Wiring Diagrams
- Shop: Brake Controller
- Article: Trailer Tire Sizing
- Search Results: l44649
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer