Can an EZ Lube Hub and Drum be Used with Bearing Buddies on a Non-EZ Lube Trailer Axle
Question:
Can you use his hub assembly with bearing Buddies because my trailer axle is not an easy Lube trailer axle
asked by: Johnny
Expert Reply:
You could use Bearing Buddies with hub and drum assembly # AKHD-545-35-EZ-K but you might as well use the regular hub and drum version # AKHD-545-35-K. It also costs less than the EZ Lube model.
You would use a Bearing Buddy model 1980 such as # BB1980A-SS for stainless steel or # BB1980A for a chrome finish.
Products Referenced in This Question
Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Bearing Buddy Bearing Protectors - Model 1980A w/ Auto Check - Chrome Plated (Pair)
- Trailer Bearings Races Seals Caps
- Caps
- Bearing Protector Grease Cap
- 1.98 Inch
- Bearing Buddy
more information >
Bearing Buddy Bearing Protectors - Model 1980A-SS w/ Auto Check - Stainless Steel (Pair)
- Trailer Bearings Races Seals Caps
- Caps
- Bearing Protector Grease Cap
- 1.98 Inch
- Bearing Buddy
more information >
Product Page this Question was Asked From
Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Easy Grease
- EZ Lube
- Pre-Greased
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Article: Most Popular Wheel Bearings
- Shop: Dexter Trailer Axle Beam with EZ-Lube Spindles - 89" Long - 3,500 lbs
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Pre-Greased
- Q&A: 3,500 lb Hub Replacement Recommendation for 2001 EZ Loader Boat Trailer
- Q&A: Bearing Buddy Compatibility With 1.99 Inner Diameter Hub Assemblies.
- Q&A: Which Bearing Buddy to Use with Trailer Hub # AKIHUB-545-35-G-EZ-K
- Q&A: Parts Needed When Adding Brakes to a 3,500 Lbs. Axle
- Q&A: Correct Bearing Buddies for 3.5K Trailer Hub and Drum Assembly 10 Diameter 5 on 4-1/2 Pre-Greased
- Q&A: 2002 Alumaweld Boat Rogue Trailer Hubs Replacement
- Q&A: Recommended Bearings and Hubs for 3500 lb Square Axle Trailer Spindle
- Video: etrailer Trailer Hubs and Drums - Hub - AKIHUB-545-35-K Review
- Video: etrailer Trailer Brakes - Electric Drum Brakes - AKEBRK-35-SA Review
- Video: etrailer Trailer Hubs and Drums - Hub - AKIHUB-545-35-G-EZ-K Review
- Video: etrailer Trailer Hubs and Drums - Hub - AKIHUB-545-35-EZ-K Review
- Video: etrailer Trailer Bearings Races Seals Caps - Seals - 58846 Review
- Search Results: spindle
- Search Results: castle nut