bing tracking image
Q & A Icon

Parts Needed to Flat Tow a 2020 Buick Envision  

Question:

Just read your article on flat towing the 2018 Buick Envision. Could you modify that to reflect the needs for a 2020 Envision, please? I think Id like to start with the Roadmaster 523196-4 baseplate. Will that unit accept other than Roadmaster tow bars? Blue Ox? Thanks,

0

Expert Reply:

I can definitely help you out with a flat towing setup for your 2020 Buick Envision!

You can definitely use the Roadmaster Crossbar-Style Base Plate Kit # 523196-4 with the Adapter # RM-033 so that the base plate kit is compatible with a Blue Ox tow bar, but in all honesty it would be much easier to use the Roadmaster Direct-Connect Base Plate Kit # RM-523196-5 with the Adapter Kit # BX88185 instead because you don't have a whole bar that you need to use as an adapter.

I'm guessing that you already have a Blue Ox tow bar but if you don't already have one and that's the direction you are wanting to go then I recommend the Ascent Tow Bar # BX4370 which uses non-binding latches and comes with safety cables.

Then for wiring you can use the same Flexo-Coil Wiring Kit # RM-15267 along with 2 of the Fuse Bypass Switch # RM76512 for the fuses in locations 29 and 32 in your instrument panel fuse box. The Fuse Bypass Switch means that you just have to flip a switch to disconnect your fuses instead of having to physically remove your fuses each time you flat tow your Envision.

To complete your towing setup you also need a supplemental braking system. The Stay-IN-Play DUO # SM99251 mentioned in the article you referenced is a great option as long as your motorhome has hydraulic brakes. If your motorhome has air brakes though you need the Air Force One # SM99243 instead which is essentially the air brake version of the DUO.

A lot of flat towing setups might require the use of a high-low adapter to keep the tow bar level while towing a vehicle. I have linked a helpful article for you to reference to see if this applies to you. If it does then I have also linked our selection of adapters for you to filter through.

Also be sure to reference your copy of the owner's manual for any specific flat towing operations.

expert reply by:
0
Jon G

David

6/1/2020

Wll a roadmaster base plate on my 2008 Saturn Vue XE fit on a 2020 Buick Enclave ?

Etrailer Expert

Chris R.

6/4/2020

No, your 2020 Buick Enclave will require a new setup. We actually don't currently have any base plate kits available for the 2020 Enclave.

Products Referenced in This Question









Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>