Are Air Bags of Air Lift Kits AL88388 and AL88341 Interchangeable

Question

Question:

I currently have AL88388 from my old truck and would like to transfer them to my new truck which would be AL88341. Can I just purchase an new mounting kit or do I have to buy a complete new kit?

asked by: Richard B

0

Expert Reply:

The bags are different between the two kits so your best option would be just to go with the # AL88341 which comes with everything you would need Richard.

expert reply by: Jameson C

0

Answer 1

The OEM prep package consists of 4 &quot;pucks&quot; in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The…

view full answer...

Answer 2

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 3

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from…

view full answer...

Answer 4

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two…

view full answer...

Answer 5

You do not have to use a sliding 5th wheel hitch in a short bed truck. In many cases, truck beds shorter than 8 ft do not have enough clearance between the trailer and truck to execute sharp turns. This is why sliding hitches were invented. Due to…

view full answer...

Answer 6

Beds shorter than 8 foot do commonly need a slider hitch David, but a lot of modern fifth wheel trailers are now made with tapered noses to help and in a lot of cases a slider isn't required. So if the trailer you plan to tow has a tapered…

view full answer...

Answer 7

Hey Trevor, so the B and W Companion Slider hitch part #BWRVK3400 only fits the B and W Turnoverball gooseneck hitches and would not fit the gooseneck hitch of your 2022 Chevy Silverado 2500 with OEM pucks. The funny thing about the Patriot slider…

view full answer...

Answer 8

There might be a solution but it all comes down to what gooseneck hitch you have installed in your truck. If you can let me know what brand hitch you have I can help find you exactly what type of slider hitch solution would work best. Hopefully you…

view full answer...

Answer 9

Hi Mike, good question so I checked directly with Firestone for you and can verify that yes, the Ride-Rite air springs you asked about do fit the 2024 Chevy Silverado 2500 ZR2. The correct part number is the following: - Firestone Ride-Rite Air…

view full answer...

Answer 10

The Curt A-Series line is the premium version over the Q-Series line and comes with a few differences. One major difference being the jaw design for the A-Series, which overlaps itself instead of just butting up to itself like the Q-Series does.…

view full answer...

Answer 11

Yes, the puck system used on the 2016-2019 Chevy/GMC trucks is different than the pucks used on the 2020 and newer trucks. So you would need a 5th wheel like the B&W Companion #BWRVK3710 for your 2020 GMC Sierra 3500 with an 8' Bed.…

view full answer...

Answer 12

The bags are different between the two kits so your best option would be just to go with the #AL88341 which comes with everything you would need Richard.

view full answer...

Are Air Bags of Air Lift Kits AL88388 and AL88341 Interchangeable

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching