How Long are the Replacement Fan Blades for AirrForce 42" Hugger Style Ceiling Fan # 277-94444

Question

Question:

hi do the black matt blades come in 17in.

asked by: Anna

0

Expert Reply:

The overall length of the Replacement Fan Blades for AirrForce 42" Hugger Style Ceiling Fan # 277-94444 that you referenced is 16-5/8 inches.

expert reply by: Jameson C

0

click to enlarge

Answer 1

I measured the Replacement Blades for AirrForce 42" Hugger Style RV Ceiling Fan #277-000398 for you and they are 16- 5/8 inches long with 4 inches wide at the bottom and 4-7/8 inches wide at the top. I've attached a photo to assist.

view full answer...

Answer 2

The Replacement Brushed Chrome Brackets #277-000399, Black/Villa Fan Blades #277-94444 and Cherry/Maple Fan Blades #277-000398 are the only replacement ceiling fan parts we currently carry. I have included an image below with the measurements for…

view full answer...

Answer 3

What you are looking for is the Replacement Blades for AirrForce 42" Hugger Style RV Ceiling Fan #277-000398. These are the exact replacements for the 42" Hugger Style RV Ceiling Fan.

view full answer...

Answer 4

The correct slide topper for your trailer with a 153-1/2 inch measurement is the 13 foot option, which comes in either black or white: - Black: Solera RV Slide-Out Awning #LCV000168109 - White: Solera RV Slide-Out Awning #LCV000163300 And because you…

view full answer...

Answer 5

Yes, the correct fan blades for the 42" Hugger Style RV Ceiling Fan for RVs part #277-000084 are the Replacement Blades for AirrForce 42 Hugger Style RV Ceiling Fan part #277-94444.

view full answer...

Answer 6

There are a variety of reasons why the space between the tires on your tandem axle trailer might differ between the left and right side. I first recommend verifying that the trailer is on even ground when you are taking the measurements between the…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

Great question, Jeff! When the Rota-Flex first came out it renovated what a pin box could do and be, but at this point in time that technology is a little more dated and the Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box #325-GH-8040 is the "new…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

How Long are the Replacement Fan Blades for AirrForce 42" Hugger Style Ceiling Fan # 277-94444

Product Page this Question was Asked From

Continue Researching