Material of 10 Inch Lube Plates for Fifth Wheel Hitches

Question

Question:

Greetings, 10" Lube plate for 5th wheel. Do you have one with graphite I hear about? Thanks

asked by: Gene

0

Expert Reply:

Each of our 10 Inch lube plates for fifth wheel hitches are made from nylon, which is going to just as good a job as the graphite lube plates so you don't have to use any grease. The 10 inch lube plates we offer are:

- Curt 10" Fifth Wheel Trailer Hitch Lube Plate # 16721
- Lube Plate for Reese 5th Wheel Trailer Hitches - 10" Diameter # RP83002

I have added links to video reviews of each of these lube plates for you to check out.

expert reply by: Kyle S

0

Answer 1

The correct size lube plate to use will be based on the surface area of the skid plate on the 5th wheel hitch. The majority of 5th wheel hitches will use either a 10" or 12" lube plate. However, the overall diameter is not as…

view full answer...

Answer 2

For their Companion series of 5th wheel hitches, B&W recommends using a 10 inch lube plate. I'd recommend the #16721 from Curt. The lube plate would protect the skid on your hitch from getting scratched up, and would eliminate the…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 5

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 6

We do have that exact lube with the Aqua Lube part #RM-400-011-30.

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 9

When installing the Roadmaster Split Bushing for Anti-Sway Bar part #RM-205249-10, I recommend using the Mystik JT-6 part #L74FR. This is a marine grease that is very similar to what comes with their sway bars.

view full answer...

Answer 10

The puck feet on the Gen-Y Hitch Gooseneck Trailer Hitch for Dodge Ram OEM Puck Systems #GY83XR is just to help stabilize the ball mount and does not lock into place in the puck. The locking mechanism on top will lock the shank into the gooseneck…

view full answer...

Answer 11

Yes, you can hook up a power inverter to input one and then shore power to input two on the Furrion Automatic Transfer Switch part #F30ATS. The dip switch will then need to be in the off position in order for the power to transfer instantly without…

view full answer...

Answer 12

The Adjustable Width Trailer Hitch Receiver for RVs part #13703 is what I recommend for a Grand Design Solitude. It features a 3,500 lb gross trailer weight capacity and 350 lb tongue weight rating. This will be the most offered for a trailer as…

view full answer...

Material of 10 Inch Lube Plates for Fifth Wheel Hitches

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching