Replacement Mounting Hardware for Draw-Tite Hitch on 2018 Buick Encore

Question

Question:

I ordered a draw tite class 2 trailer hitch and did not receive the hard ware. I have a 2018 Buick Encore. I need to order the mounting hard ware.

asked by: Russell J

1

Helpful Expert Reply:

The replacement mounting hardware for the Draw-Tite Trailer Hitch # 36554 on your 2018 Buick Encore can be obtained with part # RHK. Once on the product page simply type the hitch model number (36554) inside the text box provided and select "Draw-Tite" from the manufacturer drop-down menu. We will then send out the full hardware kit for this particular hitch.

Keep in mind though that the hardware should be included if you purchased the hitch new. Sometimes the bag can be pretty well hidden inside the hitch receiver so first make sure that it's not tucked away out of view. If you still can't find it and you purchased the hitch from us please let me know.

expert reply by: Chris R

1

Answer 1

We sell for replacement hardware for trailer hitches like the Draw Tite #76034 with the part #RHK.

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

Hey Travis, congrats on the new 2024 Jayco Flight 284BHS! Your travel trailer looks to have a GVWR of 7,950 lbs so I recommend going with the Equal-i-zer Weight Distribution w/ 4-Point Sway Control #EQ37121ET and pairing it with the Shank…

view full answer...

Answer 4

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 5

For your race trailer with aluminum roof panels it will seal on the edges with a Butyl Tape #AL64UV. Then you will use either a Non-Sag #AL33KV or Self-Leveling #AL68KV sealant to seal the mounting screws and edges of the aluminum roof panels to…

view full answer...

Answer 6

We have just what you need. If you type RHK in the search box on our website it will take you to the replacement hardware kit product page. You will then simply type the number of the hitch you need hardware for in the box that is labeled Hitch Item…

view full answer...

Answer 7

You will need to order the Replacement Hardware Kit #RHK. On the product page you will enter Curt Trailer Hitch Receiver #13147. This will then supply you with all the hardware to install the receiver on a 2009-2013 Subaru Forester. If you are also…

view full answer...

Answer 8

Sure can, as we do indeed have replacement hardware for the Curt Trailer Hitch Receiver #C14017; what you will need is the following: - Replacement Hardware Kit for Trailer Hitches #RHK All you need to do is click #RHK, enter "C14017" in…

view full answer...

Answer 9

I do have a solution for you, however the closest spacer block we currently have available to the dimensions you listed in your question is the Reese Spacer Block #RP3022. The size of this spacer block is 1/4" x 1" x 3". If you are…

view full answer...

Answer 10

No, the Replacement Mounting Hardware #C75JR is not going to fit the Curt Class III Hitch #C13135. If you are in need of a hardware kit for the #C13135 hitch, we can provide that with Part #RHK. When you go to the page for #RHK you will see a box…

view full answer...

Answer 11

The Draw-Tite Max-Frame Trailer Hitch Receiver #76020 for your 2023 Mazda CX-9 is no longer compatible with the J-Pin 63201. Draw-Tite stopped making their receivers compatible with this pin in 2021 and we have long sold through all those receivers.…

view full answer...

Replacement Mounting Hardware for Draw-Tite Hitch on 2018 Buick Encore

Product Page this Question was Asked From

Continue Researching