Can A Grille Guard And Front Hitch Both Fit A 2011 Nissan Frontier

Question

Question:

Does it fit with a full grille guard on the front of my truck?

asked by: Joel L

1

Helpful Expert Reply:

The mounting locations for both a grille guard and the Draw-Tite Front Mount Trailer Hitch Receiver # 65075 front mount hitches are usually some of or the same installation points and/or occupy some of the same space in the front of your Nissan Frontier. You always have the option to remove the grille guard first and then install the front hitch to use either or but it's highly unlikely you'll be able to use both at the same time.

Included are the instructions for this front mount hitch to show how the front hitch installs should you try to do both or install after removing the grille guard.

expert reply by: Patrick R

1

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

The height of the SumoSprings Solo Custom Helper Springs #SSR-612-47 is 4-1/2". These are designed to have a 1/2" - 1" gap so if you have a lift you will need to measure to make sure they will fit. If the gap is more than 1" then…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

I am happy to verify for you that your 2023 Nissan Frontier Pro 4X is 100% compatible with the Draw-Tite front hitch that fits, which is the following part number: - Draw-Tite Front Mount Trailer Hitch Receiver #65075 So you will have no issues…

view full answer...

Answer 5

Thanks for the picture! Yes, there are modifications required but all you will need to do to install the Draw-Tite item #65075 on your 2022 Nissan Frontier is to remove the air damn or trim about 1/4 of it away. This piece will sit behind the hitch…

view full answer...

Answer 6

The Draw-Tite Front Mount Trailer Hitch Receiver part #65075 is a confirmed fit for a 2022-2023 Nissan Frontier Pro 4X. I check with Draw-Tite for you to confirm. It's the same front hitch as the previous generation so that is where there may be…

view full answer...

Answer 7

The Draw-Tite Front Mount Trailer Hitch Receiver part #65075 is a fit for a 2010 Nissan Frontier and will require either removal or modifications to the center air dam trim piece or skid plate if present. I have attached a photo for you that shows…

view full answer...

Answer 8

The Draw-Tite front-mount hitch #65075 is a confirmed fit on your 2017 Nissan Frontier. From the tops of the frame brackets that contact the frame down to the bottom of the receiver tube the dimension is 6-inches according to my Draw-Tite contact.…

view full answer...

Answer 9

To answer your question about which front mounted hitch option you should order for your 2016 Jeep Grand Cherokee, there is actually only one that fits, the Curt Front Mount Trailer Hitch Receiver #C31033. That said, your tow hooks do need to be…

view full answer...

Answer 10

Curt front mount trailer hitch #C31033 will fit your 2013 Jeep Grand Cherokee as long as the vehicle does not have factory tow hooks. There are no options if it does have factory tow hooks. Though we have heard of at least one customer who had a…

view full answer...