Is There Trimming Required to Install Trailer Hitch on a 2019 Volkswagen Golf R

Question

Question:

Will I need to cut up my rear bumper fascia to install a hitch on my 2019 Volkswagen Golf R?

asked by: Marc

0

Expert Reply:

The hitches that fit your 2019 Volkswagen Golf R like the EcoHitch # 306-X7332 all require some fascia trimming. This EcoHitch is the way to go though as it's only option that has a 2 inch opening which more accessories are made for and is in general is stronger.

I attached a picture that shows the trimming required as well.

expert reply by: Jameson C

0

click to enlarge

Answer 1

For your 2019 Volkswagen Golf R we have 2 hitches from EcoHitch and one from Stealth. The cutout of the Stealth #SH89ZR is minimal while for the EcoHitch #306-X7333 is 3-1/4" x 3" and #306-X7332 it is 4-1/4" x 3". I would…

view full answer...

Answer 2

The cutout of the the EcoHitch #306-X7333 and #306-X7332 it is 3-1/4" x 3". Since the cutouts are the same I highly recommend going with the EcoHitch #306-X7332 because it gives you a 2" receiver over the 1-1/4" receiver size for…

view full answer...

Answer 3

We currently only have one trailer hitch receiver option available for a 2015 Volkswagen Golf R which is the EcoHitch Hidden Trailer Hitch Receiver part #306-X7333 for 1-1/4" or part #306-X7332 for 2". The best thing about the EcoHitch is…

view full answer...

Answer 4

Yes, all of the trailer hitches for your 2019 Volkswagen Golf R require some fascia trimming for the installation. Out of the available options I recommend going with the EcoHitch #306-X7332 because it is he only option for you to use a 2"…

view full answer...

Answer 5

As you mentioned, the EcoHitch #306-X7332 requires you to trim the fascia for installation.The cutout required to install the EcoHitch is 3-1/4” wide x 3” tall. There is also a 2" EcoHitch #306-X7333 available for the 2019 VW Golf R that…

view full answer...

Answer 6

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 9

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 10

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 11

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 12

If your vehicle has a factory brake controller plug, you can simply use the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers – Ford, Item #3034-P, which will connect to the vehicle plug and the brake controller. On the new E-450…

view full answer...

Is There Trimming Required to Install Trailer Hitch on a 2019 Volkswagen Golf R

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching