Can 4 Way and 7 Way of Curt Trailer Connector Adapter # C57672 be Used at Same Time

Question

Question:

97 F150. Will the C57672 fit? Can I use but 7 and 4 at the same time for my slide in camper and my boat trailer lights?

asked by: Mark

0

Expert Reply:

Yes, the 4-way and the 7-way of the Curt Trailer Connector Adapter # C57672 that you referenced can be used at the same time as they are both active at all times.

expert reply by: Jameson C

0

Answer 1

The pricing of a hitch and and the installation can vary based on the manufacturer and the location where you get the hitch installed. I recommend going with the etrailer Trailer Hitch Receiver #e98902 for your 2020 Mazda CX-5 because it gives you…

view full answer...

Answer 2

For starters, we do not offer products through Amazon as they are a competitor of ours. However, I can offer you the Curt Trailer Connector Adapter part #C57672 which will work on your 1968 Ford F-150 if you have an existing 4-way trailer connector.…

view full answer...

Answer 3

The wiring for the 2019 Mazda CX-5 can be installed after the etrailer.com hitch part #e98902. The etrailer.com Class III hitch is a 2" hitch with a matte black so it will look nice on the Mazda. I have attached a helpful installation video for…

view full answer...

Answer 4

If you are able to fit under the rear of your 2022 Mazda CX-5 some then I would say it's possible to do the installation without ramps, but in one of our reviews someone said they used 6" ramps and that definitely helped so I would say if…

view full answer...

Answer 5

The 7-Way RV Upgrade Kit for Trailer Brake Controller Installation part #ETBC7L and the Universal Installation Kit for Trailer Brake Controller part #ETBC7 will both still charge your trailer's battery even when using the Curt Echo Mobile Trailer…

view full answer...

Answer 6

From your description, I'm assuming your FJ Cruiser has the factory equipped 4 pole trailer connector. To install a controller on your vehicle, you'd need our Brake Controller Installation Kit, part #ETBC7. You'll also need to choose a…

view full answer...

Answer 7

For your 2015 Hyundai Santa Fe Limited Ultimate the Curt Vehicle Wiring Harness for Factory Tow Package - 4-Pole Flat Trailer Connector #C56332 is a very easy installation. The plug location is under the vehicle on the driver's side and requires…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

The #C57672 will allow you to convert an existing 4 pin connector on a vehicle and allow it tow a trailer that has a 7-way. By attaching the mounting bracket to the underside of the bumper or chassis of the tow vehicle, plugging the 4 pin on the…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 12

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Can 4 Way and 7 Way of Curt Trailer Connector Adapter # C57672 be Used at Same Time

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching