Bearing Buddy Bearing Protector for 7,000 Pound Trailer Axle

Question

Question:

Is there a certain size buddy bearing for a 7000 pound axle

asked by: Matt F

0

Expert Reply:

The most common hub bore diameter for 7,000 pound trailer hubs is 2.717", for which the Bearing Buddy Bearing Protectors # BB2717 will work perfectly. With that being said I still highly recommend verifying your existing hub bore diameter with a digital caliper to be certain, as not all 7,000 pound hubs are created equal.

I have attached a short video review on this set that you can check out as well.

expert reply by: Chris R

0

Answer 1

Thank you very much for your follow up question. The Bearing Buddy Bearing Protectors #BB2717 are designed to work with outer bearing model 14125A and outer bearing cup (race) model 14276, which are commonly found on 7,000-lb Dexter axles. Most…

view full answer...

Answer 2

Bearing Buddy pumps grease into the center of the hub all the way back to the grease seal. A double lip seal should be used to prevent grease from blowing out the seal when added. When the hub and seals and bearings are first assembled, they should…

view full answer...

Answer 3

Bearing Buddies are a great way to keep grease in a trailer hub. I recommend them as long as you are aware that it's very easy to put too much grease in a hub with these which will blow out the seal. They have no problem being used on longer road…

view full answer...

Answer 4

Bearing Buddies aren't ideal for getting grease through the outer bearing to the inner bearing. Typically the amount of pressure required to get the grease that far would end up eventually blowing out the seal or pushing off the Bearing Buddy.…

view full answer...

Answer 5

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 6

I would love to help you upgrade the suspension on your Twilight 2800 travel trailer. The MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR that you referenced are a great solution but we do need to double check a few things. First is that…

view full answer...

Answer 7

The number you provided, "7753400" is a patent number which corelates to the Equalizer for E-Z Flex Suspension part #013-144-03. This is for a single equalizer but if you need the entire kit it's the Dexter E-Z Flex Suspension Kit part…

view full answer...

Answer 8

For your enclosed trailer application I have several suggestions for adding interior lighting that you can control directly via a switch. Since your current 4-pole trailer wiring does NOT include a 12V auxiliary power feed that could power inside…

view full answer...

Answer 9

The only way you could power interior dome lights on a trailer without it being connected to a tow vehicle would be to power the lights with a battery like a breakaway battery. How you choose to wire up the batteries will in the end be up to you, but…

view full answer...

Answer 10

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 11

Since Demco uses 3,500 drum brake assemblies part #DMSB24429M and #DMSB24428M what you'd need is similar 3,500 electric brake assemblies like the etrailer part #AKEBRK-35L-SA for the left hand side and #AKEBRK-35R-SA for the right hand side. To…

view full answer...

Answer 12

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Bearing Buddy Bearing Protector for 7,000 Pound Trailer Axle

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching