Timbren Rear Suspension For 2019 Ram 1500 With Salt Spreader

Question

Question:

2019 ram 1500 with salt spreader which timbrens

asked by: Gregory

0

Expert Reply:

The Timbren Rear Suspension Enhancement that you need for the 2019 Ram 1500 with a salt spreader is part # TDRTT1500. These Timbren Springs are designed for service trucks like your truck with the salt spreader. They have a 7,000 lb capacity and will help to level out the load to reduce rear sag from the heavy salt spreader. I have attached an installation video for your reference.

expert reply by: Heather A

0

Answer 1

The overall height of the Timbren Rear Suspension Enhancement System #TDRTT1500 that you referenced is 4-9/16 inches with the included 1 inch spacer installed. Without the spacer it's 3-9/16 inches. Timbren recommends you have between 1/2 inch to…

view full answer...

Answer 2

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 3

It sounds like the purpose of getting the air helper spring would be to counteract the 1 inch compression you're getting in your rear suspension caused by the pin weight of your 5th wheel. If that's the case, I believe that the AirLift 5000…

view full answer...

Answer 4

I'm assuming your 2024 F-250 has the 6-3/4' bed. If that is correct, the right tie-downs are in fact the #TLF3008 and #TL77CR. TorkLift has accounted for the bed access steps on the 2024 model and confirmed these will fit your truck.

view full answer...

Answer 5

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

If you are considering Timbrens like the #TDR1500DQ and the SumoSprings like the #SSR-307-47 for your 2022 Ram 1500 4x4, I recommend the SumoSprings #SSR-307-47. The SumoSprings will offer the same quality as the Timbrens in terms of suspension…

view full answer...

Answer 8

The Hellwig Adjustable Big Wig Rear Anti-Sway Bar #HE94FR is only going to leave a few inches between it and the spare tire, as you can see in the attached picture. Depending on how far forward you have the tire it could potentially interfere with…

view full answer...

Answer 9

We have run into this quite a few times in the past, and the best option will be replacing the Lance 7-pin connector with a standard 7-way blade connector like the #PK12706. This will give you a standard 7-way connector to plug into the factory 7-way…

view full answer...

Answer 10

Since your weight distribution hitch is working to keep your 2020 Ram 1500 level I recommend going for the lighter Blue #SSR-307-40 springs. These have the 1" spacer as well like the heavier Black #SSR-307-47 springs which you can take out or…

view full answer...

Answer 11

Yes, they will. The B&W Custom Installation Kit w/ Base Rails item #BWRVK2604 are confirmed to fit the 2023 Ram 1500's without a diesel engine. These fit both the 5-1/2' and 6-1/2' bed lengths. These custom fit brackets mount in…

view full answer...

Answer 12

Both the Timbren Rear Suspension Enhancement System #TDR1500DS and #TDR1500DQ that you referenced are designed to fit the 2011 Ram 1500, but there are a couple differences that may factor into which set will work for your specific model Ram and…

view full answer...

Timbren Rear Suspension For 2019 Ram 1500 With Salt Spreader

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching