Titan Trailer Hitch Receiver Locks

Question

Question:

Will this fit the Titan? Is it available in same lock multiples? Do you have any other locks that fit the Titan?

asked by: Jeff

0

Expert Reply:

Yes the Trailer Hitch Receiver Lock part # C23519, is for 2 inch trailer hitch receivers. The link below will take you to all the locks that will work with the 2-1/2 inch receivers.

expert reply by: Amanda

0

Answer 1

The useable span on Curt hitch lock #C23519 is 3-5/8 inches so it will work great on your 2016 Chevy Suburban with the factory 2 inch trailer hitch. And like you said it is stainless steel so corrosion will not be a factor. I have linked a video…

view full answer...

Answer 2

One of the nicer locking hitch pins we offer is the Curt #C23519. This 5/8-inch diameter hitch pin will work with 2-inch and 2-1/2 inch hitch receiver tubes. It is made of stainless steel and also includes a waterproof cap to keep dust out. This…

view full answer...

Answer 3

Are you sure you need a span that large? Typically a 2 inch hitch like what you have wouldn't require nearly as much as that. For example the Curt hitch lock part #C23519 (which is an excellent choice for a hitch lock has a span of 3-5/8…

view full answer...

Answer 4

I spoke with my contact at BOLT and he confirmed that the BOLT Trailer Hitch Receiver Lock for 2" and 2-1/2" Hitches, part #BL7018446, will code to your 2014 Chevy Suburban's ignition key. This lock is a great alternative to…

view full answer...

Answer 5

Hitch pins and hitch pin locks like the part #C23519 that you referenced don't actually bear any weight when used with a ball mount so they don't have weight capacities. The downward force of the tongue weight of the trailer is so…

view full answer...

Answer 6

The first thing you need to do is to make sure that the lock on your Thule T2 Pro XTR #TH83JV is unlocked first. The most common problem is trying to tighten the knob while it is locked. In order to solve this issue, you need to first unlock the…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 10

The 5.30-12 tires, being wider, are going to make more contact with the road. This means that the noise, and heat build up will be higher than a 4.80-12 tire but the rolling resistance will actually be less because the tire is larger diameter. The…

view full answer...

Answer 11

Since both a ST145/R12 size tire, like the Kenda Karrier S-Trail #AM10130, and a 5.30-12 size tire, like the Kenda K353 #AM10068, fit a 12 inch wheel, a ST145/R12 size tire can replace a 5.30-12 size tire. Keep in mind that these tires do have…

view full answer...

Answer 12

Load range B trailer tires are going to have a lower capacity than C load range tires. Basically that, psi rating, and the ply rating are the only differences. A higher load range tire would last a little longer than lower load ranges of the same…

view full answer...

Titan Trailer Hitch Receiver Locks

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching