What Install Kit is Needed to Mount Snowbear Plow to 2008 Chevy Silverado 1500

Question

Question:

Will this 5xm5 universal crossmember fit a 2008 Chevy Silverado , 1500 series ? I have a cross member that fit a 2002 ford 150 and doesnt even come close to fitting my 2008 Chevy. If this will not work what part do I need for this truck? Thank you

asked by: Daniel D

0

Expert Reply:

We have install kits that will allow you to install a Snowbear plow on the front of your 2008 Chevy Silverado like with the kit part # SB397-002 but a universal plow crossmember would not be what you'd need to fit the plow to the vehicle.

expert reply by: Jameson C

0

Answer 1

The correct Custom Mounting Bracket Kit for SnowBear Hydraulic and Winter Wolf Snowplows for a 2013 Chevrolet Silverado 2500 is part #SB397-111.

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 4

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 5

I checked with Curt and I can confirm that the Curt Front Mount Trailer Hitch item #C22NR does fit the 2022 Chevrolet Silverado 1500 LT with the diesel engine. The only picture we have is from the installation instructions and I have attached it…

view full answer...

Answer 6

There is actually a carrier specifically for your application. Well, not vaulting poles, but 6 inch PVC pipe. Take a look at Conduit Carrier Kit # RP7054900. It fits 6 inch diameter PVC schedule 40 or 80 and this set up can be locked using a padlock…

view full answer...

Answer 7

Hey Ronald, thanks for reaching out! The correct replacement EZ Lube hub and drum assembly for your Shur Trac Trailer is the Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles #AKHD-545-35-EZ-K. Our fitguide is geared more towards vehicles and…

view full answer...

Answer 8

Both of the Curt hitch receivers have the same bolt hole measurements. It's 9 inches from the first hole (Closest to the front of the truck) to the second hole and 5-1/2 inches from the second to the third. There's 39 inches across from hole…

view full answer...

What Install Kit is Needed to Mount Snowbear Plow to 2008 Chevy Silverado 1500

Product Page this Question was Asked From

Continue Researching