Is B&W Companion 5th Wheel Hitch Compatible with 2019 Ford F-250 6-3/4' Bed with OEM Puck System

Question

Question:

I have the RVK3400 hitch that I used for my last truck with the B&W Turnoverball hitch. Is there a way that I can use it with the OEM puck system on my 2019 Ford F-250 Super Duty short bed?

asked by: Daniel

0

Expert Reply:

To use the B&W Companion with the OEM puck system on your 2019 Ford F-250 Super Duty with the 6-3/4' bed you need to swap out the base on your # BWRVK3400 and use the Companion Slider Base # BWRVB3370 instead.

The Head Assembly # BWRVC3006 is used for all Companion 5th wheel hitches so you don't have to purchase the entire Companion Hitch # BWRVK3370.

Attached is a photo showing the Companion installed on a 2018 F-350 Super Duty that was sent in by a customer that you can reference.

expert reply by: Jon G

0

click to enlarge

Answer 1

Yes you can do exactly that; the B&W Companion uses the same #BWRVC3006 head unit on both hitches, and since you already have that head unit from the Companion hitch on your Chevy, you can simply purchase the Companion sliding base that fits your…

view full answer...

Answer 2

The hitch head is the same so yes, you can absolutely swap out the base of your B&W Companion for the sliding base that fits the factory puck system of your 2020 Ford F-350 Super Duty. All you need is the Replacement Slider Base for B&W OEM…

view full answer...

Answer 3

The B&W Patriot 5th Wheel Trailer Hitch #BWRVK3255 works great with a rotating pin box. B&W makes some of the best hitches in the towing business and I highly recommend them. The Patriot has a 18,000 lbs capacity and its dual jaws provide 360…

view full answer...

Answer 4

I have a solution for you but you are going to need to replace the base of your B&W Companion 5th Wheel Hitch so it can fit in the OEM towing package on your new 2022 Ford F-350 Super Duty. The square shaft you are referring to only fits in…

view full answer...

Answer 5

Yes, the Replacement Slider Base for B&W OEM 5th Wheel Trailer Hitch - Ford Towing Prep Package - 20K #BWRVB3370 will fit the factory pucks in your 2013 Ford Super Duty and is compatible with the head from your B&W Companion OEM 5th-Wheel…

view full answer...

Answer 6

From left to right the pucks of the #RP30868 measures 30 inches and then from front to back they measure 13 inches.

view full answer...

Answer 7

So it isn't actually the hitch that is compatible with the discontinued Reese 30085 5th wheel hitch, it's the base rails that the hitch fits into. And the correct base rails for this hitch on a GMC/Chevy are the following: - Underbed Rail and…

view full answer...

Answer 8

If you install the Under-Bed Rail and Installation Kit #RP30868 and the Gooseneck Trailer Hitch Head Kit #RP30158 on your 2016 Chevrolet Silverado 2500 it will give you the 4 pucks and gooseneck hitch locations. You will already be getting the…

view full answer...

Answer 9

The B&W Companion that fits in the factory prep package on your 2011 Ford F-250 is part #BWRVK3370. This 5th wheel sliding hitch is also a confirmed fit for a 2015 Ford F-350 with the factory prep package which uses the pucks that you mentioned.

view full answer...

Answer 10

The B&W Companion OEM 5th Wheel Hitch for Ram Towing Prep Package - Dual Jaw - 25,000 lbs #BWRVK3600 will allow you to utilize the same hitch head with any of the B&W Companion bases. It will be compatible with the B&W Turnoverball…

view full answer...

Answer 11

Yes, the B and W Head part #BWRVC3006 that you referenced does fit the Replacement Base for B&W Companion OEM 5th Wheel Trailer Hitch #BWRVB3300. This combination of parts would fit the factory Ford rail kit you have in your truck as well.

view full answer...

Answer 12

I have a solution for your but it does involve a new base unfortunately. You van use the Replacement Slider Base for B&W OEM 5th Wheel Trailer Hitch part #BWRVB3370 and your original head to create a full system for your truck. If I may though, A…

view full answer...