bing tracking image
Q & A Icon

Furrion Backup Camera System Loses Signal Part Way Through Trip  

Question:

Usually about an hour and half into a trip the monitor repeatedly loses signal. Shows a split second of live feed, freezes up, then says signal lost. Any way to boost signal strength to truck?

0

Expert Reply:

I took a look at the owner's manual for the Furrion Vision S Wireless RV Backup Camera System like part # FOS43TASF and have attached for you below a list of possible causes for your signal loss issue. I am not aware of any sort of signal booster so you will need to review the information below.

- Check if the camera antenna is fitted and secured correctly - it should be vertical.
- Distance between camera and monitor is too great. Reduce distance between camera and monitor.
- Large dense objects could be obscuring the signal. If possible, move the objects.
- Interference from electrical appliances may be affecting the wireless signal. Turn off the appliances when using the system.
- Interference from overhead power lines may be affecting the signal.
- Try unpairing and pairing

If all else fails, you can switch to a wired system like the Rear View Safety Backup Camera System with Trailer Tow Quick Connect Kit part # RVS-770613-213 which uses a hardwired connection so you won't have signal loss issues.

expert reply by:
0
Conner L

Products Referenced in This Question


Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>