Is RockyMounts MonoRail Compatible with E-Bike That Has Fenders

Question

Question:

Does this rack work with a bike that has front fenders. I have an e bike that has front fenders. Thanks

asked by: Anil P

0

Expert Reply:

We do have bike racks for your application but since the RockyMounts MonoRail 2 Bike Platform Rack # RKY10003 secures bikes by the wheel the ratcheting arm need to rest right where front fender is located.

Instead you need to use a bike rack that secures the bike by the frame. We have 2 different styles in the same price-range as the MonoRail with the Hollywood Racks Sport Rider SE # HLY74FR and the Saris Freedom # SA4412B-R. The Sport Rider SE uses the same type of ratcheting arm as the MonoRail but for this application it comes down on the bike frame. The Freedom has a cradle in the middle that holds the frame of the bike. Both options are great bike racks and I don't have a problem recommending either one. The Freedom has a little bit of an advantage as it can accommodate weird frame shapes.

The best option we have for your bike is the Thule EasyFold XT # TH903202. This uses clamps attached to an arm which gives you a huge range of fit applications plus it has a ramp for loading heavy bikes that is stored inside the bike rack. The EasyFold XT was designed specifically for E-Bikes so if you plan on doing a lot of biking this option is well worth the investment.

I have attached some review videos that you can check out.

expert reply by: Jon G

0

Norm

4/7/2024

Hi Jon What rack for two ebikes weighing 65lbs each would you recommend for a step through that doesn't have a conventional cross bar to pull down on? Thanks Norm

Reply

Jon G.

4/9/2024

@Norm I really like the Hollywood Racks Destination E Bike Rack # HLY66ZR for your application because it doesn't cost as much as some of the higher-end racks, bit it still offers a solid solution that meets the needs of your bikes. By utilizing a middle clamp you can secure your e-bikes by their frame even without the traditional crossbar that you talked about. Check out the linked video for more information!

Helpful Links

tv-review-hollywood-racks-destination-e-bike-rack-hly66zr.aspx

Reply

Answer 1

The best bike rack for your Aventon Level 2 E-Bike is going to be the Yakima OnRamp Bike Rack item #Y36FR. This bike rack will also work with your carbon frame bike. This 2-bike carrier comes with a ramp for easy loading. The Aventon's fat…

view full answer...

Answer 2

I have a solution for you. Here at Etrailer, we strongly discourage using wheel-mounted bike racks like the Kuat NV 2.0 #NV22B for bikes with fenders. Mounting wheels with fenders can cause the fenders to crack or become damaged, especially with…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

The biggest change between the Thule T2 Pro and Pro XT #TH83JV is the distance between the bikes. Originally the T2 Pro was designed to work with Fat bikes right out of the box. The only issue was people had a hard time getting 2 Fat bikes to fit…

view full answer...

Answer 5

Hey Tom! At this time, February 2024, we don't have any installation videos of a hitch being installed on a 2024 Kia K5. If we end up making a video it will show up on the page for the Class I Curt Trailer Hitch Receiver #C58JR, and if you're…

view full answer...

Answer 6

Either the Kuat Tranfer 1 #KU64FR or the RockyMounts MonoRail Solo 1 #RKY10007 would handle the bikes you describe easily. Both would hold the bikes by the tires, so the fact that the rack won't come into contact with the frame will work well…

view full answer...

Answer 7

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 8

The locking hitch pin of the Thule T2 Classic part #TH9044 or #TH9044-TH9046 comes with a lock core. You'd want the part #TH450200 to give you the two additional lock cores for the arms of the rack and then you'd be set.

view full answer...

Answer 9

It does! If you take a look at the accompanying photo that one of our customers sent in, you can see step-thru ebikes being carried by the OnRamp bike rack, which is available for either a 2" or 1-1/4" trailer hitch receiver: - 2"…

view full answer...

Answer 10

The Kuat Transfer V2 part #KU74FR has a distance of 9 inches from the center of it's hitch pin to the nearest portion of the rack when folded up so as long as you have 9 inches or less from the hitch pin hole to the furthest point out on the rear…

view full answer...