Troubleshooting Tekonsha Prodigy P2 Brake Controller Sometimes Not Releasing Brakes
Question:
Intermittently my P2 brake controller will not release the applied brakes. I have a 2008 Silverado that I am using the controller in, and this condition happens with multiple different trailers. If I quickly tap the brake pedal it will release and everything is normal again.
asked by: Derek R
Expert Reply:
The issue you're describing could be coming from a few possible areas, including the brake controller itself.
Since the trailer brakes are sticking with multiple trailers, we at least know the issue is somewhere on the truck side. What I first recommend doing is making sure the red wire from the Tekonsha Prodigy P2 # 90885 is still securely connected to the brake switch wire on the truck, or if you used a Plug-In Adapter Harness for installation, that the plugs are fully seated with each other. Check for any frayed/damaged wiring that needs to be replaced.
Next take a look at the 7-Way connector at the rear bumper of your Silverado. Look for any debris or corrosion that might be built up in/around the pins, cleaning out as needed. Sometimes corrosion can develop to a point that it bridges a couple circuits together or causes a short.
If all of this looks okay then the problem is likely an internal issue with the P2, and it will need to be replaced. Keep in mind that the Prodigy P2 does have a limited lifetime warranty.
Product Page this Question was Asked From
Tekonsha Prodigy P2 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Trailer Brake Controller
- Proportional Controller
- Electric
- Electric over Hydraulic
- Automatic Leveling
- Under-Dash Box
- Dash Mount
- Up to 4 Axles
- LED Display
- Up to 360 Degrees
- Tekonsha
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Brake Controller
- Shop: Vehicle Cargo Control
- Shop: Hopkins Collapsible Vehicle Trunk Cargo Organizer with Mesh Bins
- Shop: Pigtail Wiring Harness for Tekonsha and Draw-Tite Brake Controllers - 34" Long
- Q&A: Lug Nuts for 7K Dexter Axle
- Shop: Trailer Hitch
- Shop: Tekonsha Prodigy P3 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Search Results: trailer brake controller
- Video: Choosing the Right Brake Controller
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Trailer Wiring
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Search Results: brake controller
- Article: Trailer Tire Sizing
- Video: Choosing the Right Trailer Wiring
- Shop: Redarc Tow-Pro Liberty Brake Controller - Dash Knob - 1 to 2 Axles - Proportional
- Article: Trailer Wiring Diagrams
- Shop: Suspension Enhancement
- Video: Redarc Tow-Pro Liberty Brake Controller Review RED24FR
- Shop: Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Search Results: 90160
- Q&A: My Vehicle has a 4-Pin Trailer Plug, but Trailer has 7-Pin Trailer Plug
- Search Results: 25580
- Article: Brake Controller Installation: Starting from Scratch
- Shop: Gooseneck Hitch
- Article: Towing a Trailer? Let's Talk About Brake Controllers
- Q&A: Brake Controller Recommendation for a Truck with Air Brakes and a Trailer with Electric Brakes
- Video: Tekonsha Prodigy P3 Trailer Brake Controller Review
on Trailer Brake Controller
