Can Roadmaster Comfort Ride Suspension Enhancement Fit Under and Over Slung Axles

Question

Question:

Will the shock kit work with under slung axles?

asked by: Tim H

0

Expert Reply:

Yes, we've checked with Roadmaster in the past and they've confirmed for us that the Roadmaster Comfort Ride Leaf Spring Suspension Kits like the # RM-2460-2570 that you referenced can be used on under and over slung axle setups.

I attached a review video for this for you to check out as well.

expert reply by: Jameson C

0

Answer 1

The Roadmaster Comfort Ride Shock Absorbers for Tandem Axle Trailers #RM-2450 can be used with both underslung and overslung axles. As per the instructions you will need to bolt up the extension plates in the correct orientation for your axle(See…

view full answer...

Answer 2

For your 2023 GMC Sierra 3500 you are going to want the Firestone Ride-Rite Air Helper Springs item #F2613. These air bags have a 5,000 lbs load leveling capacity so they will offer plenty of support for your 5th wheel trailer. They are compatible…

view full answer...

Answer 3

Yes, the Roadmaster Comfort Ride Shock kit part #RM-2460-2570 will work great on your 2021 Grand Design Reflection 337RLS that has 6k axles currently. Based on the axle tag pics you sent in I can tell you would need an axle we currently do not carry…

view full answer...

Answer 4

The recommended clearance with leaf spring suspension on an unloaded trailer is between 2 - 2-1/2 inches. You should have sufficient clearance with your loaded trailer, as leaf springs only tend to deflect 1-1/2 inch when carrying a load.

view full answer...

Answer 5

I spoke to Roadmaster and the springs on the #RM-2460-2570 will have no issue replacing your current ones. They said they are designed to replace the fairly standard 25 1/4 inch springs and will require no modifications or add-ons of any kind.

view full answer...

Answer 6

I went out to our warehouse and measured one of the Roadmaster Comfort Ride Slipper Spring System like part #RM-2460-2570 for you. The box is 3-1/4" wide and the opening is 3-3/4" long x 2-3/4" wide. I have attached a photo of these…

view full answer...

Answer 7

As long as the 33 inch measurement you're referring to when you say wheelbase is the distance between the axles center on center of the hubs, then yes; you can use the Roadmaster Comfort Ride with Shock Absorbers #RM-2460-2570. It looks like…

view full answer...

Answer 8

The Roadmaster Comfort Ride Leaf Spring Suspension Kit w/ Shock Absorbers - Tandem 7K Trailer Axles #RM-2460-2570 is unfortunately not going to be a correct fit for your 4,400lb Dexter axles nor do we currently have a correct fitting Roadmaster leaf…

view full answer...

Answer 9

Yes, I spoke with Roadmaster and confirmed the Roadmaster Comfort Ride Leaf Spring Suspension Kit part #RM-2460-2570 will work on your 2017 Forest River Wildcat 383MB with a 35" spread.

view full answer...

Answer 10

Increasing the tire and wheel size can increase the height of the trailer but it's usually quite minimal. Before you do anything else you should see if the pin box can be adjusted. Although you have to be careful here since This will lower the…

view full answer...

Answer 11

Since the Roadmaster Comfort Ride Leaf Spring Suspension Kit w/ Shock Absorbers #RM-2460-2570 changes the leaf springs you will need to take a measurement from your front hanger bolt hole to the rear hanger bolt hole on your trailer to determine the…

view full answer...

Answer 12

Thanks for all of the info on the suspension and frame setup of your Jayco Northpoint. The center hanger setup of the Roadmaster Comfort Ride Leaf Spring Suspension Kit w/ Shock Absorbers #RM-2460-2570 would attach to the square metal tube that you…

view full answer...

Can Roadmaster Comfort Ride Suspension Enhancement Fit Under and Over Slung Axles

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching