How Thick is Aluminum of Single Axle Trailer Fender # CE18041ATB

Question

Question:

How thick is the aluminum plate that makes up this fender? Not counting the diamond treads, I guess...

asked by: Rob

1

Helpful Expert Reply:

The aluminum that the Single Axle Trailer Fender # CE18041ATB you referenced is made from is 14 gauge which is .064 inch/1.63 mm thick.

expert reply by: Jameson C

1

Answer 1

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 2

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13…

view full answer...

Answer 3

Load range B trailer tires are going to have a lower capacity than C load range tires. Basically that, psi rating, and the ply rating are the only differences. A higher load range tire would last a little longer than lower load ranges of the same…

view full answer...

Answer 4

To find the load capacity for your axle you should look on the trailer VIN plate or sticker that lists the VIN number. The weight rating of the axle should be listed on that same plate or sticker. Also, the axle could have a tag or plate on it that…

view full answer...

Answer 5

I am sorry I don't have any tires that are going to fit your rim. I do have a couple of comparable size tires that come in a wheel tire combo. I have listed the two below along with their lug patterns. 5 on 4-1/2 Lug Pattern - Kenda…

view full answer...

Answer 6

Thank you for providing the specs for the suspension components that you already have. Correct hanger spacing really depends on the components being used such as springs, hangers and equalizers. Most of the hanger spacing dimensions that we have…

view full answer...

Answer 7

You can add larger wheels and tires to a trailer as long as you have enough room for the larger size. The main clearance issues we find when putting larger tires and wheels on a trailer is from the top of the tire to the fender and from the inside…

view full answer...

Answer 8

For a single axle trailer, you want the shackle strap to be able to move so that you have the spring deflection needed for your suspension. Angled like the photo or even almost vertical is fine you just don't want the shackle strap to bind…

view full answer...

Answer 9

The 60/40 axle placement formula is a great starting point and does take into account the tongue of the trailer from where the trailer sits on the hitch ball. Please keep in mind that this is a very basic formula or estimate for axle placement. For…

view full answer...

Answer 10

Yes Matt, it looks like what you're looking for is the Tandem Axle Trailer Fender #HP88VR. These fenders are a bit longer than #HP34VR measuring 68" long, (so 3" longer), will also work with 14" wheels, and has the…

view full answer...

Answer 11

There is not a chrome version available of the Tandem Axle Teardrop Trailer Fenders for Boat Trailers - Stainless Steel - 14" Wheels - Qty 2 #HP34VR. That said, the #HP34VR being stainless steel with the PVC coating gives them a nice shine…

view full answer...

Answer 12

When choosing replacement fenders you want to do your best to match the dimensions of your old fenders. The closest thing we have to 63" fenders are the Tandem Axle Teardrop Trailer Fenders for Boat Trailers - Stainless Steel - 14"…

view full answer...

How Thick is Aluminum of Single Axle Trailer Fender # CE18041ATB

Product Page this Question was Asked From

Continue Researching