Does Yakima TopWater Rooftop Fishing Rod Carrier Fit Yakima OverHaul HD Truck Bed Ladder Rack  

I do have some options for you but if you want to haul kayaks at one time or another, you'll need a ladder rack to extend above the height of the cab. Otherwise, your trailer would hit the kayaks if you just had them over the bed with a mid…

Everything you mentioned will work...the Retrax Pro XR part #RTX84QR that fits your 2024 GMC Sierra 2500 short bed can be used with the Yakima OverHaul HD Ladder Rack part #Y01151-5955 which is then also compatible with the Yakima SkyRise HD…

I apologize for any confusion on what the proper torque specs are for 1/2 inch lug nuts on trailer wheels. I attached a picture of a chart to the right that details what the proper torque specs are for a trailer wheels lugs based on lug size, wheel…

The Base Rails for Thule TracRac SR Sliding Truck Bed Ladder Racks #TH21608 do not fit the RetraxPRO XR, unfortunately. The only ladder rack that fits the RetraxPRO XR is the Yakima OverHaul HD Adjustable Truck Bed Ladder Rack for Tonneau Cover…

The RetraxPRO XR Hard Tonneau Cover w/ Trax Rails #RTT-80851 will pair nicely with the Rhino-Rack Vortex Crossbar System #RRVA180B-RRRLT600, which features a 220 pound weight capacity. You can absolutely use a roof top tent with this setup but you…

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

That's weird, the 7-Way Vehicle Power Adapter for Furrion RV Observation Camera #FR87PR should allow you to use your camper at the same time as that's what it's designed for. If you want to just avoid the adapter all together, I would…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

Yes, it will. The B&W Companion OEM 5th Wheel Hitch item #BWRVK3710 will work with the Replacement Wedge Block for Lippert Turning Point Pin Box item #LC79UD on a Reese Sidewinder. However, if you don't already have the Turning Point Wedge…

The Furrion camera system we have is a closed system and would not be compatible with the in-dash display so you would need to purchase GM's camera system to be able to connect to your display instead of having another monitor. If you do end up…