How To Order Stainless Steel Hitch Locks and Coupler Locks to be Keyed Alike

Question

Question:

Looking for 2 coupler locks, 1 trailer hitch lock all in stainless steel, with single key. Coupler is 2inch and is mounted on an extension, thus the need for 2 coupler locks. If so, what is the part number and how do I order to get them keyed alike

asked by: Jess

0

Expert Reply:

For stainless steel coupler lock and hitch receiver lock that can be keyed alike, I would recommend the etrailer brand locks.

They offer the etrailer Stainless Steel 2 Inch Hitch Receiver Lock, part # e98882, which will fit most 2 inch hitch receivers, and has an inside width of 2-5/8 inches.

For coupler locks they offer the etrailer Stainless Steel 7/8 Inch Span Coupler Lock, part # e98890, which has an inside width of 7/8-inch, and the etrailer Stainless Steel 1/2 Inch Span Coupler Lock, part # e98885, which has an inside width of 1/2-inch.

All of these etrailer locks can be ordered keyed alike for multiple locks. The way to order them keyed alike is to go to the product page for that item and right under the price is a quantity box. You will insert the quantity you need in that box and click on add to cart tab. Another page will come up that will show what is in your shopping cart and under each product in your shopping cart will be an edit option tab. When you click on the edit option tab it will give you the option of keyed alike or keyed unique. You will click on keyed alike and then hit the update tab right under your choice. This will allow you to order as many as you like to be keyed alike.

expert reply by: Jeff D

0

Answer 1

As long as your ball mount features a hollow shank, you can absolutely use the Let's Go Aero Anti-Rattle Trailer Hitch Receiver Lock #63232 for your towing application. This is a really nice product that will dramatically reduce the rattle and…

view full answer...

Answer 2

I'm not sure which coupler that is, but I can say that a certain amount of rattling is to be expected because of the space needed to allow the ball to turn inside the coupler-especially with an adjustable coupler. With that being said, you can…

view full answer...

Answer 3

Since hitch locks like the #63232 don't end up carrying the full weight of a trailer they don't normally have towing capacities so it will work well for you. As long as you are using this hitch lock in the correct size hitch it's going to…

view full answer...

Answer 4

The patented Lets Go Aero Anti-Rattle Device for 2-Inch Hitches, part #63232, will work in most aftermarket Class II, III and IV 2-inch hitches. It will not fit some extra-wide factory-installed hitch receviers. Please note that it can only be used…

view full answer...

Answer 5

The Saris SuperClamp HD #SAR44VR and SuperClamp EX #SA4025F bike racks aren't compatible with bikes that have fenders because the clamp hooks will damage the fenders. I took a look at our Q&A's and didn't see anything where we said…

view full answer...

Answer 6

The best bike rack for your 2018 Subaru Outback will depend on what the distance is from the center of the hitch pin hole to the edge of your rear bumper. I highly recommend the Saris Freedom #SA4412B because at less than 30 lbs it is extremely…

view full answer...

Answer 7

The only option we have for you to receive both a coupler lock and hitch pin lock keyed alike for your 2-1/2" trailer hitch receiver and your trailer coupler would be to use the Trailer Hitch Receiver Lock part #e98881 with the Trailer Coupler…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

Yes, the B&W Companion OEM 5th Wheel Trailer Hitch item #BWRVK3670 will fit in the puck system of your short bed 2024 Ram 2500. The Companion Slider has a 20,000 lbs capacity and will give you 12" of travel for making tight turns and…

view full answer...

Answer 10

The primary difference is a matter of numbers. When installed, the Draw-Tite Class III #76025 will sit so the inside top edge of the receiver tube sits about 13 inches above the ground, and the receiver tube will sit under the bumper so that the…

view full answer...

Answer 11

To carry a 3-4 bike rack with your 2015 Honda Odyssey you'll need a 2 inch trailer hitch like the Draw Tite Class III part #76025 which is a confirmed fit. I really like this hitch as it has a concealed crosstube which means you'll only see…

view full answer...

Answer 12

The SoftRide #SR25219 locking and anti-rattle hitch pin is not available keyed alike. The next best thing is the etrailer #e98882 stainless steel locking hitch receiver lock which can be keyed alike on the order page in any quantity you need. To…

view full answer...