Will GM Cargo Management System Prevent Access TonnoPro Tonneau Cover Install on 2010 GMC Sierra

Question

Question:

What is a cargo management system on a 6ft 6 in bed

asked by: Richard D

0

Expert Reply:

The cargo management system is an optional track system mounted in the truck bed on the inside of the bedside up near the top. The presence or lack of this system will influence the fit of a tonneau cover because the system can interfere with the way some tonneau covers install on the truck.

However, the Access TonnoSport you have looked at, part # A22020289 will fit whether or not your truck came with the cargo management system. Either way, it'll fit perfectly.

expert reply by: Mike L

0

Answer 1

The choice between a side wind jack like the etrailer Round, A-Frame Jack - Sidewind, part #TJA-5000S-B, and a top wind jack like the Bulldog Round, A-Frame Jack - Topwind, part #BD155032, will usually be for clearance issues. A top wind jack will be…

view full answer...

Answer 2

Bulldog A-frame jacks like the #BD155033 are made overseas, but there are some Made in the USA options available. If you're looking for an American made A-Frame trailer jack, the A-Frame Trailer Jack - Topwind - 2,000 lbs. by Dutton-Lainson…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

Because the Retrax PRO MX Tonneau Cover #RT80467 for the 2019 Chevy Silverado 2500 covers the bed rails, you would not be able to use a ladder rack like the Thule TracRac #TH27000XT since that rack requires the use of the bed rails. The only tonneau…

view full answer...

Answer 5

Hi Jeff; thanks for the question and sturdy is definitely a good word for the etrailer tonneau that fits your 2022 Ram 1500 with a 5-1/2 foot bed, the etrailer Hard Tonneau Cover #e35DR. It's made of a fiberglass-reinforced plastic which is a…

view full answer...

Answer 6

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 9

Hey Dustin, thanks for reaching out! I will recommend SumoSprings over Timbrens all day everyday because they are much more forgiving when the vehicle is unloaded. We've actually joked around here about how the Timbren kits will either give you…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 12

The best place to confirm the towing capacity of your 2015 Chevy Silverado 1500 Crew Cab 4x4 with 5.3-liter V8 engine is the printed owner's manual. This will reflect the capacity of your specific pickup with the particular mix of equipment…

view full answer...