Low Profile Quality Toolbox For A-frame Trailer

Question

Question:

Do they offer a low profile version of this box? UWS01039 Im wondering if there is any reason why this could not be mounted to the front of a trailer. DZ8546SB

asked by: Andy H

0

Expert Reply:

Yes, there is a low profile UWS A-frame trailer tool box part # UWS04531 for gloss black and part # UWS04530 for silver. They are both 16 inches wide, 34 inches long and 13 inches tall with a cubic square feet of 2.9 so they will not provide as much storage space as the UWS tool box part # UWS01039.

There is no reason why you can't use the DeeZee Hardware Series Truck Bed Toolbox - Utility Chest Style part # DZ8546SB on your trailer's a-frame as long as you have the space. People usually use A-frame toolboxes because they match the shape of the trailer so they look nicer and there isn't any overhang. The DeeZee Hardware Series Truck Bed Toolbox measures 46-1/2 inches long x 19 inches wide x 17 inches tall so it will most likely hang off of the sides of the trailer a couple inches. You will also most likely need to source additional hardware to secure it to the tongue.

expert reply by: Heather A

0

Answer 1

If you're looking for heavy duty and don't mind it weighing more on your trailers tongue, then I recommend going with a steel toolbox for your trailer like the RC Manufacturing T-Series Trailer Tongue Tool Box - A-Frame - Steel - 5.2 Cu Ft -…

view full answer...

Answer 2

That spindle looks pretty well destroyed so best option is going to be to replace the axle. You are going to need to measure your current axles in a few places to get the correct one as we don't have access to what your numbers reference. You…

view full answer...

Answer 3

Generally speaking, the lube plate will need to cover the skid plate on the 5th wheel hitch. There are some pin boxes out there that will recommend a specific lube plate but most of the times this classification will be from the 5th wheel hitch…

view full answer...

Answer 4

We do have the Rhino-Rack Masterkey Lock Barrels #RRRK093-2 which will provide you with 2 new lock cores and keys for your Rhino-Rack Zenith MasterFit Rooftop Cargo Box #RRRMFZ66. As far as pricing goes on the different sets they can change based on…

view full answer...

Answer 5

So I have your hub narrowed down to a few different possibilities but we need to know what your bolt pattern is to know for sure. We have the part #84556UC3 for if your bolt pattern is 5 on 5 inch. We have the part #845476UC3 for if your bolt pattern…

view full answer...

Answer 6

There is no mounting hardware included with the Aluminum A-Frame Trailer Tongue Toolbox, item #350970, due to the different construction and mounting locations that may be required for many different styles of trailers. I would recommend using a…

view full answer...

Answer 7

The Bargman 7-Way, RV-Style Connector #WG54006-043 referenced in your question uses the standard RV-style pin locations for its 7-Way connector. I have attached a diagram of these locations and their functions for you to check out. Wire colors will…

view full answer...

Answer 8

Aluminum A-Frame Trailer Tongue Toolbox Item #350970 is weather resistant but not waterproof. For something to be considered waterproof it has to be able to be submerged under water for a certain period of time and not let water in. None of the…

view full answer...

Answer 9

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 10

Hey Kevin thanks for your question. There is not much downside to going with the 5,000 lb springs instead of the 3,500 lb. A higher rated spring may make the ride a bit more "chunky" at times, since the spring would not flex as easily.…

view full answer...

Answer 11

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 12

The overall measurements of the Lippert Underchassis Double Bin Storage Unit w/ Spare Tire Carrier #LC125460 is 99-1/2 inches long overall and 23 inches wide at the mounting brackets. The length at the mounting brackets is 78 inches. Please see…

view full answer...

Low Profile Quality Toolbox For A-frame Trailer

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching