Recommended Replacement Triple Steps for ATC Trailer

Question

Question:

Im looking to replace my double steps with triple steps on my ATC trailer. The current steps are mounted under the frame and the first step is about 14inch from the floor level. the mounting point is about 8.5inch below floor level so Im looking for something where the first step is close to level with the mounting point. Also, the mounts are about 29inch wide. Do you have any suggestions? See the attached photo for details.

asked by: Brandon

0

Expert Reply:

While we do have some step solutions for you, none of the traditional style steps have the top step level with the mounting brackets when they are pulled out and/or a bracket mounting width of 29" wide (which is much wider than normal).

For your application I recommend either going with the TorkLift GlowStep Revolution Uprising Steps, part # TLA9103 for a 24" width between door frame hinges or part # TLA9003 for 28" width between door frame hinges, OR the TorkLift GlowStep Revolution Scissor Steps # TLA8003. The Revolution Uprising steps mount on a bracket that fits between your door frame and they store inside your trailer while the Revolution Scissor steps mount with brackets like part # TLA8022 since the mounting dimensions are 27-1/2".

I like the TorkLift Revolution steps because they are easy to use and they utilize landing gear to make them stable on any kind of terrain out there (see attached review video). If you would like a different type of step I'd be more than happy to help you but you will need to use a different mounting bracket since your mounts are 29".

expert reply by: Jon G

0

click to enlarge

Answer 1

This is a pretty common issue with aluminum frames so we definitely have a options available for you. With that being said, the 8 inch frame height will make things a bit more difficult, but not impossible. First, the Curt TruTrack Weight…

view full answer...

Answer 2

For your 28 foot enclosed trailer, I'll give you the recommendation for parts all in the color black, but other color options are available and easy to find once you have the list of parts needed. Let me know if you need help with colors or have…

view full answer...

Answer 3

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 4

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 5

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 8

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

Load range B trailer tires are going to have a lower capacity than C load range tires. Basically that, psi rating, and the ply rating are the only differences. A higher load range tire would last a little longer than lower load ranges of the same…

view full answer...

Answer 11

To determine the size of the hub assembly you need to purchase you have to determine which bearings are in the old assembly. If the old assembly has L44649 inner bearings, you would use the hub you chose #8-258-5UC1. If the inner bearings are marked…

view full answer...

Answer 12

To find the load capacity for your axle you should look on the trailer VIN plate or sticker that lists the VIN number. The weight rating of the axle should be listed on that same plate or sticker. Also, the axle could have a tag or plate on it that…

view full answer...