Does Malone BigFoot Pro Canoe Carrier Fit 2014 Subaru Outback With Factory Roof Rack

Question

Question:

Do your stabilizer brackets fit on a 2014 Subaru Outback roof rack?

asked by: Rob H

0

Expert Reply:

Yes it will! I am happy to confirm for you that the Malone BigFoot Pro Canoe Carrier with Tie-Downs - Gunwale Brackets - Side Loading - Clamp On # MPG112MD will absolutely fit your 2014 Subaru Outback with the factory roof rack.

This is a great rack that has a whopping 165 lb capacity to haul your canoe and even comes with tie-downs to save you an expense and has a lifetime warranty which speaks to its durability.

i have added a link to a video review for you to check out as well.

expert reply by: Kyle S

0

Answer 1

The Curt Hitch Receiver you referenced is inactive and no longer available for purchase but when it was the main difference in the two hitch receivers is the concealment and ground clearance that the Curt Hitch item CU89FR has over the Draw-Tite…

view full answer...

Answer 2

Yes, you can flip the Yakima Keelover part #Y04069 so that the housing is inside of the canoe if you like. I attached a picture I took from the instructions that shows that this is an option you have.

view full answer...

Answer 3

Honestly, you picked the version of the Lockrack, #LR54FR, that I recommend to most. I like how it wraps around the crossbars and it will fit great on the factory crossbars on your 2007 Hyundai Santa Fe. Lockrack is the way to go when it comes to…

view full answer...

Answer 4

For your two paddle boards I recommend going with the Lockrack Adjustable XL Watersport Carrier #LR54FR. This carrier fits one kayak or two paddle boards so it will be perfect for your two paddle boards. This carrier also attaches into T-Slots with…

view full answer...

Answer 5

I have a more cost effective option for you that will also make it much faster and easier to get your kayak secured down. It is much better than getting a whole pioneer platform so you won't have to replace the rack you already have on your roof.…

view full answer...

Answer 6

You can take a quick measurement of your crossbars on the roof of your Forester to see if the Yakima KeelOver Rooftop Canoe Carrier, part #Y04069 will work with them. The Keelover will fit crossbars with a maximum dimension of 3-1/2 x 3-1/2 inches.…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

Hi Alec, The Inno Kayak Roof Rack w/ Tie-Downs #INA452 needs a 28" minimum spread so that the saddles sit at the right spot for the kayak and support the weight properly. This is probably just a general guide from Inno though because the length…

view full answer...

Answer 9

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 10

For a roof rack to be compatible on your 2020 Jeep Wrangler with Sky One-Touch Power Top, it can't be mounted on the top of the roof and it needs to be high enough for the folding roof to clear. What you need are tall gutter-mounted roof racks.…

view full answer...

Answer 11

Hey Alec, For your 2016 Ford Fusion I recommend the recommend a roof rack from Inno: Inno Aero Crossbars #INXB138-145 Inno Through Feet for Aero Crossbars #INXS250 Custom Fit Kit for Inno XS200, XS250, and INSU-K5 Roof Rack Feet #INK860 As with any…

view full answer...

Answer 12

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...