Power Tailgate Lock for 2014 Ford F-150 Lariat

Question

Question:

I have a 2014 ford dot lariat. Would like to make the tailgate lock automatic when I lock my truck. I have power door locks and a regular lock on the tailgate. Is this possible? Thanks

asked by: Mike

1

Helpful Expert Reply:

Yes, in order to have the tailgate on your 2014 Ford F-150 lock in correspondence with the power locks on the truck you will just need the Pop & Lock # PAL8250. This system is designed specifically for your F-150 and it will wire into the power door locks so that whenever you lock the truck the tailgate will lock too.

The custom setup eliminates the need for any drilling during installation and it comes with a 1-year warranty. I have attached an installation video as well so you can see exactly how it works.

expert reply by: Chris R

1

Answer 1

I believe you are referring to something like the Pop & Lock Power Locking Handle for Truck Caps and Hard Tonneau Covers #PAL9555 which adds a power lock to the ARE camper shell on your 2016 Ford F-250. The only other thing that you might be…

view full answer...

Answer 2

There are a few tailgate lock options for your 2013 Ford F-150. If you want to integrate the lock into your factory power lock system, I'd recommend the Pop & Lock Custom Tailgate Lock #PAL8250. This is a confirmed fit for your vehicle, so it…

view full answer...

Answer 3

When we installed the Pop and Lock Tailgate Lock part #PAL8250 in a 2012 Ford F-150 just like yours we found that the green wire with a brown stripe carried the lock voltage and the blue wire with a green stripe is for unlocking. For more info check…

view full answer...

Answer 4

The tailgate lock which will fit your 2012 Ford F-150 Raptor with factory power locks is the Pop & Lock Custom Tailgate Lock #PAL8250. I've added links to a review video of this lock as well as a video of an install for you to take a look…

view full answer...

Answer 5

I spoke with Pop & Lock to help troubleshoot this issue. They stated that you may be connected to the wrong wires. The proper wires for the passenger door of your 2013 Ford F-250 should be the grey with a brown/tan stripe and purple with a grey…

view full answer...

Answer 6

Your 2014 Ford F-150 Raptor has keyless entry. Therefore if you are installing the Pop & Lock Custom Tailgate Lock - Power - Black, part #PAL8250, you will need to access the passenger side kick panel. The wires you would splice into are behind…

view full answer...

Answer 7

For your 2013 Ford F-150 installation of Pop & Lock tailgate lock #PAL8250 will be the same as in the video I have linked on a 2013 F-150. And for the written instructions they are as follows: 1. Lower the tailgate and remove the access panel. 2.…

view full answer...

Answer 8

Because the problem you describe is intermittent, I would suspect a wiring issue. I'd review the wiring connections where you tapped the wiring for the tailgate lock into the vehicle wiring behind the passenger-side kick panel. Instead of the…

view full answer...

Answer 9

I spoke to my contact at Pop and Lock and he informed me that you are most likely using the incorrect wiring. He advised me to have you double check that you are using the correct circuits to wire in this #PAL8250. I attached an install video for you…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

Yes, it will so long as your Ford key looks like one in the picture below. The Replacement Lock Cylinder for BOLT Toolbox Latch item #BLT79FR only works with Bolt tool boxes.

view full answer...

Power Tailgate Lock for 2014 Ford F-150 Lariat

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching