How Do I install The Pop & Lock Custom Tailgate Lock On My 2014 Ford Raptor

Question:

Can I tap into the driver side ??? I’ve already ran wires under frame and behind driver side

asked by: Mark J

Expert Reply:

Your 2014 Ford F-150 Raptor has keyless entry. Therefore if you are installing the Pop & Lock Custom Tailgate Lock - Power - Black, part # PAL8250, you will need to access the passenger side kick panel. The wires you would splice into are behind the kick panel. There you will find the wire harness with the pink w/red wire and pink w/black wire.

I have included the installation instructions for a more detailed explanation and an installation video link below.

expert reply by: Mark Smith

Pop and Lock Tailgate Instructions
(click to enlarge)

Mark C.

10/28/2021

Can I tap into the driver side ??? I’ve already ran wires under frame and behind driver side

Mark S.

10/28/2021

Per Popandlock, you can definitely wire to the driver's side of the vehicle. If you have a two door you would look for these wires in the kick panel and if it is a four door these wires are in the step plate. The wires you need to locate on the driver's side are grey/ with a brown(tan) stripe and light blue with a green stripe.