What Does Hitch Stair with 2 Steps # RHS2 Weigh

Question

Question:

how much do they weigh please...thanks

asked by: Jeff

0

Expert Reply:

The Hitch Stair with 2 Steps # RHS2 that you referenced weighs 19 lbs and has a weight capacity of 250 lbs. I attached a review video for this for you to check out as well.

expert reply by: Jameson C

0

Answer 1

The difference is the color of the pin and clips of the two kits. The Patriot Adjustable Hitch Adapter part #PH67SR has black pin and clips whereas the #PH54FR has red ones.

view full answer...

Answer 2

When bike rack manufacturers design racks, one of the factors they add to the design is how to add clearance to the ground to prevent the rack or bikes from being damaged during travel. All of the racks that we carry, have a rise of some height in…

view full answer...

Answer 3

I went to our warehouse to measure the Brophy Hitch Stair with 2 Steps #RHS2. From the top of the shank tube to the top of the upper step the distance is 5-1/2-inches, as shown in the linked photo I prepared for you. From the top of the shank to the…

view full answer...

Answer 4

You can measure straight down from the bottom of the door to the ground to choose stairs. A popular option is scissor steps. I have included a link to the options for you. We have 2 to 6 step models available with different heights.

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 10

Hey Roy, The only U-bolt kit we currently only offer for 1-1/2" square axles is part #CE23102, which only has a 3-3/8" length so it likely wouldn't be the best option for you. Instead you'll want to order the 1-1/2" Square…

view full answer...

Answer 11

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 12

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

What Does Hitch Stair with 2 Steps # RHS2 Weigh

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching