What Camera System is a Grand Design Reflection 297RSTS Pre-Wired For

Question

Question:

For a 2019 pre wired for furrion observation system grand design 297RSTS, what are the systems you can use?

asked by: David M

0

Expert Reply:

There is only one system that will work on your Grand Design Reflection 297RSTS, the Furrion Vision S Wireless RV Backup Camera System. This system is offered with a 4.3" monitor part # FOS43TASF or the 5" monitor part # FOS05TASF. These two systems will both be plug and play. If you like you can add up to three additional cameras to the systems with 5" monitor system, the Furrion Vision S Wireless RV Backup Camera part # FCN48TASF for the truck or wherever else you would like and then the Furrion Vision S Side Camera w/ Marker Light Bracket part # FCE48TASL for the side of the trailer.

expert reply by: Conner L

0

Answer 1

The bearings your Lippert 5,200 lb axle has are part #LM67048 and #25580 and the grease seal is #RG06-070. For a cotter pin you'd need just the #165649.

view full answer...

Answer 2

Thanks for the pictures of the axle information! Based on the information you provided your axle uses the following components: Inner bearing #25580 Inner race #25520 Outer bearing #LM67048 Outer race #LM67010 Grease Seal #GS-2250DL All of these…

view full answer...

Answer 3

For a similar 60 amp converter that can charge a lithium battery you'd want the part #PD9160ALV but the part #PD9260C can only charge lead acid batteries.

view full answer...

Answer 4

You can verify that the 10-19 grease seal included in Bearing Kit #BK2-100 is the correct one for your spindles by taking two measurements. First you want to measure the rear hub bore where the seal is inserted. The seal's outer diameter needs to…

view full answer...

Answer 5

Your 2021 Grand Design Reflection 240rl will be prewired for the Furrion Vision S Wireless System #FCE48TASL-05. I like the 5" screen kit that includes additional side view cameras as well. You can monitor all 3 cameras while driving or select…

view full answer...

Answer 6

I have a solution for you, but GM has made it so that only the IntelliHaul Echo Master cameras are wirelessly compatible with their Infotainment systems and we haven't come across any aftermarket wireless observation system for RVs that can be…

view full answer...

Answer 7

Since your trailer has the bracket #FRCBRKT-BL that would mean your trailer has the Furrion pre-wiring which is very common for newer RVs. The part #FOS43TASF is a fit for this and would be a really easy install. This gives you a monitor with a 4.3…

view full answer...

Answer 8

Hey David, from previous customers of ours who have the same 2020 Keystone Raptor 424 we have determined that your pin box style is the Lippert 1621 which means for a Gen-Y gooseneck adapter you'd want the #GY58GR that you referenced.

view full answer...

Answer 9

A BT8 spindle would have a diameter of .99 of an inch where the bearings would both install and would have a diameter of 1.24 where the great seal would ride. That would require a hub part #AKIHUB-440-2-1K for an idler hub. A BTR spindle would have…

view full answer...

Answer 10

To determine the size of the brake assemblies you need you have to measure the depth and width of the hub drum on the axle like what you see in the picture I attached. The most common size is 2-1/4 inch wide like the #T4071600-500 that you…

view full answer...

Answer 11

I agree it is the right time to upgrade to a Lithium charger/converter as not all are Lithium compatible. I recommend using the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger - 60 Amp #PD4060K which is a replacement for your…

view full answer...

Answer 12

The ALKO 4,400 lb axles use the same bearing sizes as the standard 3,500 lb alxes. If you want USA made bearings, I recommend the Bearing Kit #TMK52VR. This kit comes with the Timken brand bearings which are all made here in the USA.

view full answer...