Correct B&W Turnoverball Gooseneck Custom Installation Kit for 2001 Ford F-350 Super Duty

Question

Question:

I searched for the b&w install kit for a 2001 ford SD F350 and part number BWGNRM1111 came up. Is this kit the correct kit for Athens truck in question? I have the center section already.

asked by: Jeremy

1

Helpful Expert Reply:

I'm glad you asked because we do have the correct part, though it is different than the one you referenced. I checked with the manufacturer, B&W, and the correct kit for your 2001 Ford F-350 Super Duty is the B&W Turnoverball Gooseneck Custom Installation Kit for Ford # BWGNRM1108. The part number you referenced is for later model year Ford trucks which is why it won't fit on your truck.

This installation kit will work with the B&W Turnoverball Underbed Gooseneck Trailer Hitch # BWGNRC800 which you mentioned you have already.

This install kit and hitch will give you an outstanding set up to tow your gooseneck trailer. I have added a link to a video review for you to check out as well.

expert reply by: Kyle S

1

Answer 1

When GM began manufacturing the New Body Style in 2007, they eliminated the need for a wiring adapter harness (until the 2014 model year, when they went back to using a harness). The tow package wiring harness is bundled up under the dash, and…

view full answer...

Answer 2

For your 2007 Dodge RAM 3500 HD Flat Bed Crew Cab with dually chassis there is not a B&W trailer hitch receiver available. Instead, I recommend you use the Draw-Tite Ultra Frame Trailer Hitch Receiver - Custom Fit - Class IV - 2" #41936…

view full answer...

Answer 3

I contacted B&W direct here and they do not have a direct bolt up kit for the 2017 Ford F-550 Cab and Chassis truck as they have a much narrower frame of 34" and they normally recommend that you use one of the center sections like the…

view full answer...

Answer 4

The Buyers Products Gooseneck Hitch Plate #3373014981 is a universal fit product that requires professional installation. This 13.5 x 42-inch gooseneck hitch can be welded on top of a structural steel bed or bolted to the truck frame and body. The…

view full answer...

Answer 5

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 6

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

You do have the option to utilize the air brakes on your 2023 Freightliner Cascadia to control electric trailer brakes using the Hayes Air Actuated Trailer Brake Controller, part #HA100400C. However, we mostly recommend just using an electric brake…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 12

Hey Eric, the Curt Multi-Fit Ball Kit w/ 4" Offset for Chevy/Ford/GMC/Nissan Underbed Gooseneck Hitch #C68ZV is not going to work with your Ram, unfortunately. This one is only going to work for select YMM (Year Make Model) Ford 250-450s, GMC…

view full answer...

Correct B&W Turnoverball Gooseneck Custom Installation Kit for 2001 Ford F-350 Super Duty

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching