Handle Will Not Reach Operator On Ventline Northern Breeze Roof Vent

Question

Question:

I purchased a new Ventline BV0115-04 with Screw Operator Assembly with Crank Handle and Screw and followed that up with a purchase of a Replacement Manual Lift Control Knob for Fan-Tastic Vent Clamp On Roof Vents Order #. Neither knob is long enough. You show a Replacement Knob Mounting Screw for Ventline Northern Breeze Trailer Roof Vents but I cannot find the sleeve that goes with it. Do you sell the extension piece separately or the screw and the extension together? If so, where can I find it?

asked by: Chet H

0

Expert Reply:

I do have an option for you but the Ventline Northern Breeze Roof Vents have been discontinued so replacement parts are hard to come by. We do not have the handle extension sleeve that goes between the knob and operator. The best option we can offer is to replace the entire vent for which I recommend the Ventline Ventadome Trailer Roof Vent part # V2092SP-28.

expert reply by: Conner L

0

Answer 1

I may have a solution for you, but we don't have a specific replacement crank available for the Ventline V2401 Northern Breeze. With that said, you may be able to use the Metal Vent Crank- 1" #37220305 which replaces a worn or broken…

view full answer...

Answer 2

Yes, you can replace the Northern Breeze vent with a regular vent with no fan. Both the Ventline Northern Breeze vents and a regular vent with no fan such as #V2092SP-28 fit in the same 14-1/4 inch rough square opening! I have linked a couple of…

view full answer...

Answer 3

The Replacement Gear Motor with Pinion Gear for Ventline Ventadome Trailer Roof Vent #BVB0601-00 or just the Replacement Plastic Gear for Ventline Ventadome Trailer Roof Vent - Dome Motor Gear #BVD0121-00 is what you need to lift the dome.

view full answer...

Answer 4

I linked a page for you showing all of our RV kitchen sink accessory items as well as one showing just our sink covers. RV makers typically do not publish detailed specs for items such as the sinks they install in their trailers but since we do…

view full answer...

Answer 5

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 8

Hey Chad this is a great question. So the MORryde ALLTREK part #MR89DR does offer additional vertical suspension but it does sit a little taller than the equalizers it replaces so you wouldn't have to worry about your tires hitting fenders or…

view full answer...

Answer 9

The 1-5/16" Hellwig Adjustable Big Wig Rear Anti-Sway Bars are designed for 2WD #HE97MR or 4WD #HE94FR versions of your 2021 Ford F-250. These are both designed for trucks which have a stock ride height. Hellwig does offer their 2" Lift…

view full answer...

Answer 10

Hello Chris, it sounds like you are definitely on the right track here. When replacing an equalizer, it is critical that the replacement equalizer is identical in size to the original equalizer. There is a small amount of tolerance there, like maybe…

view full answer...

Answer 11

We have run into this quite a few times in the past, and the best option will be replacing the Lance 7-pin connector with a standard 7-way blade connector like the #PK12706. This will give you a standard 7-way connector to plug into the factory 7-way…

view full answer...

Handle Will Not Reach Operator On Ventline Northern Breeze Roof Vent

Product Page this Question was Asked From

Continue Researching