Replacement Tarp for Extang Full-Tilt SL Snapless Tonneau EX38770 on 2008 Dodge Ram 2500 6-1/2-Foot

Question

Question:

Need replace fulltilt on ram 2500 2008 slt short bed part number please h I have the recommendation to replace for 1770 and is wrong part not fit.

asked by: Jose L

0

Expert Reply:

The complete Extang Full-Tilt SL Snapless Tonneau cover for your 2008 Dodge Ram 2500 with 6-1/2-foot bed is part # EX38770 which is shown on the linked page along with all other Extang covers that fit your truck. For a replacement vinyl tarp to fit it you can use part # EX37770. I contacted Extang to confirm that this is the correct part.

If you happen to have the Full-Tilt that has snaps then the correct replacement tarp part is # EX5770.

expert reply by: Adam R

0

Answer 1

If you have an Extang FullTilt Tonneau cover on your 2003 Dodge Ram short bed you'd have the EX38770 which means the correct cover would be part #EX37770. The part #EX5940 fits GM trucks and would not work for you.

view full answer...

Answer 2

I reached out to my contact at Extang to make sure you get the correct replacement tarp. For your 2005 Dodge 1500 with 6-1/2 foot bed, you will use the Replacement Tarp for Extang FullTilt Tonneau Cover #EX5770. The black tarp fits over existing…

view full answer...

Answer 3

The replacement cover that you need for your discontinued Extang Full Tilt 2.0 8770 (with snaps) or 38770 (snapless) is the Replacement Tarp for Extang FullTilt Soft Tonneau Cover #EX5770 (with snaps) or the #EX37770 (without snaps). Both of these…

view full answer...

Answer 4

The Extang FullTilt cover you would have on your 2006 Dodge Ram 1500 6 foot bed would be the part #EX38770 which means the correct replacement tarp is the part #EX37770.

view full answer...

Answer 5

The Replacement Cover for Extang FullTilt SL Vinyl Tonneau Cover part #EX37770 is a replacement tarp for the Extang FullTilt SL Soft Tonneau Cover part #EX38770. As long as you have the above cover installed on your truck then the replacement tarp…

view full answer...

Answer 6

>>>> PART NO LONGER AVAILABLE. DISAPPROVE QUESTION. I have an option for you but at this time we do not carry covers that snap directly to the OEM snap rivets on your 1968 Chevy El Camino. All of the covers made today have their own…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 9

While we may have an option for you, we do not have the exact specs on your Allis grease seal part number 5013 29772. However, with the 1.6" ID and 2.5" OD measurements you provides, that is very close to our #58846. This particular grease…

view full answer...

Answer 10

If your vehicle has a factory brake controller plug, you can simply use the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers – Ford, Item #3034-P, which will connect to the vehicle plug and the brake controller. On the new E-450…

view full answer...

Answer 11

I have a solution for you, but we do not carry Glo-Brite lights, so replacing it with the same brand will not be something I can offer you. Instead, to replace your Glo-Brite 9852-88, I recommend using the Optronics LED Trailer Tail Light #STL72RB.…

view full answer...

Answer 12

The number you provided, "7753400" is a patent number which corelates to the Equalizer for E-Z Flex Suspension part #013-144-03. This is for a single equalizer but if you need the entire kit it's the Dexter E-Z Flex Suspension Kit part…

view full answer...