Amperage and Wattage of Fan Motor of Fan-Tastic Roof vent part # FV802250

Question

Question:

How many watts does this fan need to operate.

asked by: Mike

1

Helpful Expert Reply:

In the highest speed setting the fan of the Fan-Tastic roof vent part # FV802250 that you referenced will draw 3 amps. 3 amps is 36 watts.

expert reply by: Jameson C

1

Wolfgang K.

9/8/2020

I have a fantastic fan, apparently 2016 model, standard, but not working. I want to change the 4amp fuse but cannot remove the fuse holder, how does it come off?

Reply

Jon G.

9/11/2020

This is what the manual says in regards to this roof vent: Turn the black cap anti-clockwise by one-quarter turn. Pull the cap down gently. The fuse is on the back of the cap. Check whether the wire is defective within the glass. - Then you can simply pull the fuse out.

Reply

Answer 1

I spoke with my contact at Command regarding the LED RV Interior Light #328-K-1050Q9 referenced in your question. The LED unit has a draw of 0.26 amps. I have attached a short video demonstration for this light that you can also take a look at.

view full answer...

Answer 2

I went to the warehouse and checked out the Fan-Tastic Vent Roof Vent w/ 12V Fan, part #FV802250. The fan motor on the vent has a 3-amp draw. This fan is designed to fit roofs that are up to 4-inches thick and the rough opening size you need for this…

view full answer...

Answer 3

Generally speaking, if the hinge is the same then you can use pretty much any replacement lid as the sizes are all standard. Therefore, the metal Replacement Dome Assembly for Ventline Ventadome Trailer Roof Vent part #BV0534-00 should work for you…

view full answer...

Answer 4

In the world of metric tire sizing the three numbers in a tire size 205/75R14 refer to three different tire dimensions. All tire and wheel/tire products in your size are shown on the linked page, such as #TTWA14RWS and #AM10235. The first number,…

view full answer...

Answer 5

Trailer tires really are only good for around 4-6 years past their manufacture date so you are making the right choice by replacing them now, but the size you mentioned is not a standard trailer tire size, plus it wouldn't fit on your rim as it…

view full answer...

Answer 6

I do have an option for you but roof rails won't work very well on a teardrop trailer, even if you were able to get the rails to conform, it's likely the accessories would bind due to the steep angles. Instead, you will need to use artificial…

view full answer...

Answer 7

You will have to manually turn the fan of the Fan-Tastic Vent Roof Vent w/ 12V Fan #FV802250 off after closing the lid of the roof vent.

view full answer...

Answer 8

Yes, it looks like your existing Fan-Tastic Fan model 4000BT is a standard 14" wide x 14" long roof vent so the MaxxFan Deluxe Roof Vent w/ 12V Fan and Thermostat part #MA00-05100K would fit the opening for your old vent as long as the roof…

view full answer...

Answer 9

Thanks for getting me the number on your motor as I can tell from that you need the part #MA10-20968.

view full answer...

Answer 10

I checked into this with Dutton-Lainson, and the limitation on the #DL22120 offset spare tire has to do with the weight of the 15 inch tire and wheels, and not with the physical size. The welds on the carrier are not rated to handle the weight of…

view full answer...

Answer 11

The Fan-Tastic Vent Roof Vent w/ 12V Fan and Thermostat #FV802250 has a recommended voltage range of 12 volts. This roof vent will fit roofs up to 4" thick, a variable speed fan with two modes, and a simple installation that features a two-wire…

view full answer...

Answer 12

Yes, if you wanted to reverse the air flow of the Fan-Tastic Vent Roof Vent #FV802250 all you would need to do is reverse the polarity of the wiring. This would have the air blow into the trailer instead of out.

view full answer...

Amperage and Wattage of Fan Motor of Fan-Tastic Roof vent part # FV802250

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching