Replacement Motor for MaxxFan with Part Number 10-20968

Question

Question:

I have maxxair fan can not find serial numbers anywhere sticker missing..on the motor I find a label that says PN 10-20968 Mfg 8-16..I need a motor would that be the part number I need.

asked by: Gary L

0

Expert Reply:

Thanks for getting me the number on your motor as I can tell from that you need the part # MA10-20968.

expert reply by: Jameson C

0

Answer 1

The MaxxFan Deluxe Roof Vent, #MA00-07500K probably has a faulty operator mechanism or lift motor. The correct replacement part number for Replacement Operator Mechanism for MaxxAir MaxxFan, is #MA10-20281K-1AF. The Replacement Lift Motor for Maxx…

view full answer...

Answer 2

Hey Jason, I spoke with Furrion and they stated that the Furrion Chill Cube is OEM only currently and should be released to the aftermarket distributors later on this year (2024), but there is no solid date. That says to me that they're…

view full answer...

Answer 3

Hey Jon, Yes, the Advent Air Low Profile RV Air Conditioner #ADV79FR is compatible with the Air Distribution Box #ACDB. This would have the controls on the air distribution box instead of a wall mounted thermostat. We don't currently have…

view full answer...

Answer 4

The Replacement Single Zone Thermostat for Dometic RV Air Conditioners #DMC79FR is a single zone 3 wire thermostat like the one you are describing. I have attached the wiring diagram for this thermostat and the control box below for your reference.

view full answer...

Answer 5

We do offer a direct replacement for the Dometic Duo-Therm RV Air Conditioner. The Advent Air RV Air Conditioner part #ACM135 for 13.5K or part #ACM150 for 15K is what I recommend. This unit will be a plug and play fit and it will work with your…

view full answer...

Answer 6

Advent Air Conditioners like part #ACM135 come with a connector that pairs up directly with the standard 6-wire connector. If you have a 9-wire connector then you need the kit #ACRG15 as well. For wiring I'm attaching some photos of diagrams…

view full answer...

Answer 7

If you have the ACTH12 then you should also have the Air Distribution Box #ACRG15 which will have a control box for your wiring from the rooftop unit #ACM135 and the thermostat. This air distribution box and thermostat will wire up exactly the same…

view full answer...

Answer 8

Typically if there are two wires running from the furnace to the AC system then it means that the furnace has power already connected to it and it sends that through one of the wires up to the AC until the system calls for heat, at which point the…

view full answer...

Answer 9

As you have a Coleman Mach system currently you can use the Furrion Chill AC units from the list below. These will simply replace only the rooftop units and the controls and thermostats you currently have in place with control the new AC's. 13.5K…

view full answer...

Replacement Motor for MaxxFan with Part Number 10-20968

Product Page this Question was Asked From

Continue Researching