Will BedRug Custom Full Truck Bed Liner # BRQ15SBK Fit Ford F-150 with Boxlink

Question

Question:

I have a 2016 f150 6.5 bed it has the box link system installed. Will it eork with this system?

asked by: Jason D

0

Expert Reply:

Yes, the BedRug Custom Full Truck Bed Liner # BRQ15SBK will fit your 2016 Ford F-150 short bed with boxlink but you'll need to trim the liner to fit the boxlink through it as the holes are not pre-cut on this.

expert reply by: Jameson C

0

Answer 1

Hey Chris, Because the Thule TracRac TracONE Truck Bed Ladder Rack #TH27000XTB clamps to the lip of the bedrails it won't be compatible with any tonneau cover. You would need Thule's stake pocket mounted version the TracRac SR…

view full answer...

Answer 2

Hey Jeff, The Pace Edwards JackRabbit Retractable Hard Tonneau Cover w Explorer Rails #311-JED7833 is designed for a 6-1/2' bed while the #311-KRD7936 is designed for an 8' bed. Since you have a 6-1/2' bed the #311-JED7833…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

Yes, you can install the B&W Turnoverball Underbed Gooseneck Trailer Hitch #BWGNRK1020 with the BedRug Custom Truck Bed Mat #BR44FR on your 2022 GMC Sierra 2500 with the 6-3/4' bed. You will need to make cutouts in the BedRug though for…

view full answer...

Answer 5

Once you have installed a tune on your truck with the Edge Gas Evolution CS2 Performance Tuner #EP85350 you can remove the module and cable and the tune would not be affected. You'd really only want to leave it installed if you wanted to use it…

view full answer...

Answer 6

Yes, you can definitely cut out parts of the BedRug Custom Full Truck Bed Liner so that you have access to the puck system for 5th wheel towing with your 2013 Ford F-350. The correct BedRug for your pickup depends on the following specs for your…

view full answer...

Answer 7

Yes, the Trailair Rota-Flex 5th Wheel Pin Box #LC328330 can be used with a Pullrite SuperGlide 5th wheel hitch. This particular model is designed to replace a Lippert 1621 or 1621HD 5th-wheel pin box, so if that's what you have it would work for…

view full answer...

Answer 8

You could definitely replace the bow roller on the front of your Boatmate trailer with a Yates Y-Style Bow Stop for Boat Trailers #YR6Y33-4 as long as the mounting hole dimensions will match up to your boat roller. This stop is designed to fit a 1/2…

view full answer...

Answer 9

The Pace Edwards SwitchBlade Metal Hard Tonneau Cover - Retractable - Aluminum #311-SMC0404 can support 200 lbs dispersed on top of the cover according to my contact at Pace Edwards.

view full answer...

Answer 10

I do have a custom fit tailgate liner for your 2022 Ford F-150, but it is not the Westin model, part #50-6505, you attached to your question. The Westin model is not a fit for your vehicle. However, the WeatherTech TechLiner Custom Tailgate Liner -…

view full answer...

Will BedRug Custom Full Truck Bed Liner # BRQ15SBK Fit Ford F-150 with Boxlink

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching