Top Weight Carrying Capacity of Pace Edwards SwitchBlade Metal Hard Tonneau Cover

Question

Question:

How much weight can the Pace Edwards Switchblade Metal Tonneau Cover support on top when it is extended, covering the bed? 311-SMC0404 Thank you

asked by: Thomas

0

Expert Reply:

The Pace Edwards SwitchBlade Metal Hard Tonneau Cover - Retractable - Aluminum # 311-SMC0404 can support 200 lbs dispersed on top of the cover according to my contact at Pace Edwards.

expert reply by: Jason S

0

Answer 1

We have the Thule fit kit part #THKIT3101 and feet part #TH460R which can be used with the newer Thule square bars that have a channel that run down the bottom of them like the part #TH712500 but if your square bars are solid throughout we won't…

view full answer...

Answer 2

In order to add a roof rack to the Pace Edwards Tonneau Cover with Explorer Series Rails you'll need a fit kit, mounting feet, and crossbars. I have attached these parts for you below. Fit Kit part #THKIT3101 Mounting Feet part #TH460R Corssbars…

view full answer...

Answer 3

The Explorer Rails on the Pace Edwards tonneau covers allow you to install a ladder rack like Item #311-CR6005. There are two options for Pace Edwards tonneau covers that fit the 8' bed on your 2008 Silverado. I have listed them below: With…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 6

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 7

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

The Pace Edwards SwitchBlade Metal Hard Tonneau #311-SWFA18A44 you referenced can support 200 lbs evenly distributed on top of the cover according to my contact at Pace Edwards.

view full answer...

Answer 10

The Thule Spare Me Bike rack part #TH963PRO and the Yakima Spare Tire part #Y02599 both do come with locks to secure the rack to your spare tire and cable locks to secure the bikes to the carrier. The biggest difference between the two and is only an…

view full answer...

Answer 11

It looks like you have the Thule Aeroblade bar. The T-slot dimensions are 1/2 inch wide for the top of the opening and 3/4 inch wide at the bottom. The T-slot is 1/8" inch tall.

view full answer...

Answer 12

An offset stake pocket on your 2021 Ford F-150 has a stake pocket that is biased slightly forward or rearward, not centered. On your vehicle, only the front and middle stake pockets would be offset on your 2021 Ford F-150. If your tie-down anchors…

view full answer...

Top Weight Carrying Capacity of Pace Edwards SwitchBlade Metal Hard Tonneau Cover

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching