Trailer Wiring Harness to Fit a 2017 Lexus NX 200t

Question

Question:

Does it or doesnt it fit the 2017 Lexus nx200T . I dont want to order it and have to send it back if it does not fit.

asked by: Dave

0

Expert Reply:

We do carry trailer wiring for your 2017 Lexus NX 200t but the # 118255 harness is custom fit for several different Lexus models. Instead the harness you want for your Lexus is part # 118652. I've linked the install details for you to take a look at. I confirmed the fit with Tekonsha to be sure.

If you're also looking for a trailer hitch part # 75956 is confirmed to fit your Lexus as well.

expert reply by: Charles S

0

Answer 1

Even when stored in the somewhat controlled environment of a garage, tires are still subject to dry rot and flat spotting. Even if the tire tread has plenty of depth left and you can't see any cracking with the naked eye, the generally accepted…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 5

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 6

I'm assuming that you're needing to know so you can choose the correct wiring harness, correct? You could call your Lexus dealer and give them your VIN, and they should be able to tell you how your RX350 is equipped. Or, you could remove the…

view full answer...

Answer 7

If your Lexus RX350 already has the tow package which provides the taillight converter that's plugged into the connector located behind the passenger side cargo area bulkhead as shown in the linked instructions, you'll just need the #118252…

view full answer...

Answer 8

Yes, if you installed the Curt trailer wiring kit part #C85FV on your 2023 Ford Maverick it would NOT trigger the trailer attachment message. This is because it does not tie into to factory trailer wiring where that message originates.

view full answer...

Answer 9

I definitely understand being a bit overwhelmed by the amount of options in front of you, however I can definitely help with differentiating the trailer hitches for your 2019 Subaru Outback Wagon along with explaining my personal recommendation,…

view full answer...

Answer 10

First, the trailer wiring harness #56083 is only a fit if your 2015 Lexus RX 350 came with the factory tow package. If it did not then that could be why it isn't working. Or, if it does have the factory tow package, it could be a missing fuse or…

view full answer...

Answer 11

The Curt T-Connector Vehicle Wiring Harness for Factory Tow Package #56083 requires your 2021 Lexus RX 350 to have the factory tow package which includes a factory installed module to power the trailer lights. Since your harness does not have power I…

view full answer...

Answer 12

I definitely understand how safety chain capacities and determining exactly what chain rating you need for your trailer can be a bit confusing. To keep it as simple as possible, safety chain requirements state that the breaking strength of EACH…

view full answer...