Solution for Trailer that Needs Shorter than Standard Trailer Hubs
Question:
Im working on an old cable reel trailer with no information. The bearings are the same as DX22XR, but the hub is only 3.5. Yours says measures 4.125inch . What is the measurement from the outside of one race to the other? mine appears to be about 2 3/4 Do you think DX22XR will work?
asked by: Greg
Expert Reply:
You have a shorter stub spindle on your axle which we do not have a replacement hub that will fit. The only solution we can point you towards for your trailer is a new spindle that is longer like the BT8 spindle part # TRU94FR which would then allow you to install a similar hub that you referenced part # AKIHUB-545-2-1K which has the same 5 on 4-1/2 inch bolt pattern.
Spindles need to be installed perfectly square so best option is to find a shop local to you who has experience with this and let them do it as it typically requires special jigs.
Products Referenced in This Question
Trailer Idler Hub Assembly for 2K Axles - 10" to 12" Wheels - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Pre-Greased
- Standard
- L44643
- L44643
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 10 Inch Wheel
- 12 Inch Wheel
- etrailer
more information >
BT8 Spindle for 2,000-lb Trailer Axles - 1-1/4" Diameter
- Trailer Spindles
- Standard Spindle
- 1-1/4 Inch Diameter
- Round
- For 2000 lb Axle
- TruRyde
more information >
Product Page this Question was Asked From
Dexter Trailer Idler Hub Assembly for 2,500-lb Axles - 5 on 4-1/2
- Trailer Hubs and Drums
- Hub
- Standard
- LM67048
- LM11949
- For 2500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Continue Researching
- Q&A: Titan Replacement for Dico Trailer Idler Hub 17214
- Article: Most Popular Wheel Bearings
- Q&A: Replacement For Titan Trailer Hub 17214
- Q&A: Hub Recommendation for Trailer Spindle that Measures 1.25 and .75 inches
- Article: How to Tell the Weight Rating of a Trailer Axle
- Q&A: Trailer Idler Hubs With L44649 Inner and Outer Bearings And 1-1/4 Grease Seal
- Q&A: Hub Recommendation for Spindle with Diameters of .75 and 1.25 inches
- Q&A: Bolt Pattern Referred To In Hub and Wheel Fit
- Q&A: Replacement LM11949 Bearing and LM11910 Race Needed
- Article: How to Measure a Trailer Axle
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Article: Using a Portable Generator on RV
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Trailer Tire Sizing