Is There a Curt Soft Trac Breakaway Kit that Has Battery Charge Indicator

Question

Question:

How do i know if the battery is actually being charged???....How can I test that it is happening?

asked by: Dan C

0

Expert Reply:

If you are looking for a similar trailer breakaway kit that has a built in charger and tester we have the Curt part # C52042 which will show you when it's charging and charged but the part # C52040 that you referenced does not have this feature.

expert reply by: Jameson C

0

Answer 1

I have attached an image below for the Curt Soft Trac I Trailer Breakaway Kit with Battery Charger #C52040. This image is from the lid of the battery case and better help to show exactly what wires connect to each other. It does show the correct…

view full answer...

Answer 2

We do have a breakaway kit available for your triple axle trailer with 6 brakes; for your trailer, I recommend the Curt Soft Trac I Trailer Breakaway Kit with Battery Charger #C52040. This kit will work with 1, 2, 3 axle trailers.

view full answer...

Answer 3

If all 3 of the trailer axles have brakes you will need one with enough amperage to be able to apply the trailer brakes on full for at least 15 minutes. The Tekonsha system, #50-85-313 will work with 1 to 3 axles. I have included a link to a video…

view full answer...

Answer 4

The Hydrastar Vented Marine Electric Over Hydraulic Actuator for Disc Brakes #HS481-8067 is designed to be completely plug-and-play so the female end of the 7-way would need to connect to the 7-way cable that's already installed on the trailer…

view full answer...

Answer 5

We do have replacement options for the Jensen JRV9000 though they are not touchscreen or video compatible. The JRV9000 is a double din so you will need to replace it with such like the Jensen RV Stereo part #JWM60A which is a more basic model. The…

view full answer...

Answer 6

Since your trailer doesn't use standard colors for it's wiring for lighting and braking you are going to have to wire in the breakaway kit #C52042 by function instead of by color. I won't be able to tell you which color is which on your…

view full answer...

Answer 7

The BrakeBuddy Towed Vehicle Battery Charge Kit part #BB54FR comes with a the Brake Buddy Select 3 Portable Supplemental Braking System part #HM39524. I have attached a wiring diagram of how this is setup with the Brake Buddy.

view full answer...

Answer 8

You can absolutely wire up a 3-wire breakaway switch like the Hopkins LED Breakaway Switch with 7" Lead Wires #HM20059 to replace your 2-wire switch; the difference is that the 3-wire switch has a dedicated ground wire while the 2-wire switch…

view full answer...

Answer 9

I am sorry but we do not have an AC cover with those dimensions. The closest option we have is the Replacement RV Air Conditioner Cover for Penguin and Dometic Air Conditioners item #AT3308046006 which measures 40-1/2" long x 29" wide x…

view full answer...

Answer 10

Hey Antoine, so the two kits you mentioned are actually really similar and honestly I would go with the part #ETBC7 if I were you. The #ETBC7L is basically the same thing minus a couple wires and breakers so you may as well get the kit that has…

view full answer...

Answer 11

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 12

Hey Joe, yes the Lippert stabilizer jack part #LC298707 does fit your Grand Design Transcend 245RL but it is sold individually so if you wanted a set for the front and the rear you would need to order a quantity of two.

view full answer...